Zhone Technologies 4821-A2 manual Connecting to Power

Cabling

Connecting to Power

The BitStorm 4800 Express can be powered by any AC power source supplying 90–265 VAC at 47–63 Hz.

To connect the BitStorm 4800 Express to a power source:

1Insert the supplied power cord into the power socket on the back of the unit.

02-17248

2If the BitStorm 4800 Express is in a rack, dress the power cord to the left and fasten it to the rail with a cable tie.

3Connect the other end of the power cord to a grounded AC power source.

4Make sure the STATUS LED on the front panel is ON (green). See Chapter 3-,LEDs.

32 BitStorm 4800 Express Model 4821-A2 Installation Guide 4821-A2-ZN21-30