Zhone Technologies 4821-A2 manual Installing the BitStorm 4800 Express on a Wall

Installing the BitStorm 4800 Express on a Wall

Installing the BitStorm 4800 Express on a Wall

Wall mounting requires two wood screws suitable for the weight of the fully cabled unit. These are not included. Use at a minimum 1/4-inch (6 mm) diameter screws in 3/4-inch (19 mm) plywood (not drywall).

To install the BitStorm 4800 Express on a wall:

1Identify the 6-32 x 3/16-inch flat-head screws provided in the hardware kit and the brackets suitable for a 23-inch rack. Two screws are required for each bracket.

2Orient the unit so that the bottom is facing you and the faceplate is at the top.

3Locate the supplied Right Side mounting bracket and fasten it to the right side of the unit.

05-17634

4Locate the supplied Left Side mounting bracket and fasten it to the left side of the unit.

5Tighten all screws firmly.

4821-A2-ZN21-30 BitStorm 4800 Express Model 4821-A2 Installation Guide 21