Prestige 304 Broadband Sharing Gateway with 4-Port Switch

Chapter 6

The Maintenance Screens

This chapter briefly describes the Maintenance screens in the web configurator.

6.1Introduction

The web configurator allows easy maintenance of your Prestige and is recommended for all users. Advanced users may use the CI commands included in the support notes. If you want to maintain your Prestige via FTP/TFTP, refer to Chapter 7.

The following are Maintenance screens located in the web configurator. From the MAIN MENU, click MAINTENANCE and the appropriate link to access each of the following screens.

6.2The System Status Screen

Read-only information here includes system name, ZyNOS firmware version and routing protocols. Also provided are the IP address, DHCP status and IP subnet mask of both the LAN and WAN.

6.2.1 System Status

Read-only information here includes port status and packet specific statistics. Also provided are “system up time” and “poll interval(s)”. The Poll Interval(s) field is configurable.

6.3The DHCP Table Screen

Read-only information here relates to your DHCP status. The DHCP table shows current DHCP Client information (including IP Address, Host name and MAC Address) of all network clients using the DHCP server.

6.4The F/W (Firmware) Upgrade Screen

Follow the instructions in this screen to upload firmware to your Prestige.

6.5The Configuration Screen

Backup, Restore and Default are tabs located in the CONFIGURATION screen. Follow the instructions in each screen to perform the action described next.

The Maintenance Screens

6-1