ZyXEL Communications manual Using UPnP in ZyXEL devices, P320W Support Notes

P320W Support Notes

•Control points: Control points can manipulate network devices when you add a new control point (in this case, a laptop) to a network, the device may ask the network to find UPnP-enabled devices. These devices respond with their URLs and device descriptions.

UPnP Operations

•Addressing: UPnPv1 devices MAY support IPv4, IPv6, or both. For IPv4, each devices should have DHCP client, when the device gets connected to the network, it will discover DHCP server on network to get an IP address. If not, then Auto-IP mechanism should be supported so that the device can give itself an IP address.(169.254.0.0/16)

•Discovery: Whenever a device is added on the network, it will advertise it's service over the network. Control point can also discover services provided by devices.

•Description: Control points can get more detailed service information from devices' description in XML format. The description may include product name, model name, serial number, vendor ID, and embedded services...etc.

•Control: Devices can be manipulated by control points through Control message.

•Eventing: Devices can send event message to notify control points if there is any update on services provided.

•Presentation: Each device can provide their own control interface by URL link. So that users can go to the device's presentation web page by the URL to control this device.

•2. Using UPnP in ZyXEL devices

20

All contents copyright (c) 2005 ZyXEL Communications Corporation.