ZyXEL Communications 5 7 Firewall, NAT, Active, ADVANCED, 6 Click Apply, Port Forwarding

ENGLISH

1 Click ADVANCED, NAT in the navigation panel and then Port Forwarding.

2 Select the Active check box.

3 Type a name for the rule.

4 Type the port number that the service uses.

5 Type the HTTP server’s IP address.

6 Click Apply.7 Firewall

You can use the ZyWALL without configuring the firewall.

The ZyWALL’s firewall is pre-configured to protect your LAN from attacks from the Internet. By default, no traffic can enter your LAN unless a request was generated on the LAN first. The ZyWALL allows access to the DMZ from the WAN or LAN, but blocks traffic from the DMZ to the LAN.

If you are using the ZyWALL in router mode, continue with the next section. For bridge mode, skip to Section 9.

10