ZyXEL G-120 User’s Guide

Figure 3 Application: Access Point Mode

In the example, the G-120 is installed on computer A and set to operate in access point mode. Computer A provides an Internet connection to the wireless LAN, so wireless stations B and C can access the Internet.

Note: If the computer in which the G-120 is installed uses WZC (Wireless Zero Configuration), the G-120 cannot function as an AP.

1.2.3 Changing G-120 Mode

To change between the modes, select either Station Mode or AP Mode in any ZyXEL utility screen.

Figure 4 ZyXEL Utility: Change Modes

Note: Wait for about five seconds for the ZyXEL utility to complete the mode change.

The current mode is indicated by the color of the check box, see Section 1.3 on page 24.

Chapter 1 Getting Started

23