ZyXEL Communications G-120 5.2The Link Info Screen

ZyXEL G-120 User’s Guide

3Set the wireless station’s IP address to be dynamic if you want the wireless stations to access the wired network or the Internet through the G-120. Refer to Appendix E on page 97 for how to configure your computer’s IP address.

5.2The Link Info Screen

Select the AP Mode check box and wait for about five seconds to display the screen as shown.

Figure 39 Access Point Mode: Link Info

The following table describes the labels in this screen.

Table 16 Access Point Mode: Link Info

LABEL	DESCRIPTION
Status
SSID	This field displays the name that identifies your G-120 in the wireless LAN
	network.
Current Channel	This field displays the radio channel the G-120 is currently using.
Transmission	This field displays the current transmission rate of the G-120 in megabits per
Rate	second (Mbps).
Security	This field shows whether data encryption is activated (WEP) or inactive
	(Disabled).
MAC	This field displays the MAC address of the G-120.
Output Power	This field shows the strength of the G-120’s antenna gain or transmission power.
Association List	This table lists up to 16 wireless clients that are currently connected to the G-120.
	Denotes a wireless client without WEP security.
	Denotes a wireless client with WEP security enabled.

62 Chapter 5 Access Point Mode Configuration