ZyAIR G-2000 Plus Quick Start Guide

Pre-Shared Key

Type a pre-shared key to have a more secure wireless connection than WEP encryption.

Type from 8 to 63 case-sensitive ASCII characters.

You can set up the most secure wireless connection by configuring WPA in the advanced wireless screen. You need to configure a RADIUS server to do this.

5.This wizard screen has three variations depending on what encapsulation type you use. Use the information in Internet Account Information to fill in fields.

Choose Ethernet when the WAN port is used as a regular Ethernet. Choose from Standard or a RoadRunner version.

You’ll need User Name, Password and Login Server IP Address for some Roadrunner versions.

PPPoE or Point-to-Point Protocol over Ethernet (PPP over Ethernet) also functions as a dial-up connection. Therefore you’ll also need a username and password and possibly the PPPoE service name.

Your ISP will give you all needed information.

Choose PPTP if your service provider uses a DSL terminator with PPTP login. The ZyAIR must have a static IP address in this case. You’ll also need a login name, associated password, the DSL terminator IP address and possibly a connection ID.

Click Next to continue.

If you change the ZyAIR’s IP address, you must use the new IP address if

you want to access the web configurator again.

6.This is the final wizard screen you need to configure. Fill in the fields and click Next to go to the last wizard screen.

15