ZyAIR
Table 1 ZyAIR Front Panel LED Description
LED | COLOR | STATUS | DESCRIPTION |
|
|
|
|
|
| On | The ZyAIR is ready, but is not sending/receiving data. |
|
|
|
|
|
| Off | The LED has been disabled in the web configurator or SMT. |
|
|
|
|
LAN |
| Off | The Ethernet connection is not ready, or has failed. |
|
|
|
|
| Green | On | The ZyAIR has a successful 10Mbps Ethernet connection. |
|
|
|
|
|
| Blinking | The ZyAIR is sending/receiving data. |
|
|
|
|
| Orange | On | The ZyAIR has a successful 100Mbps Ethernet connection. |
|
|
|
|
|
| Blinking | The ZyAIR is sending/receiving data. |
|
|
|
|
WAN |
| Off | The ZyAIR does not have a WAN connection. |
|
|
|
|
| Green | On | The ZyAIR has a successful 10Mbps WAN connection. |
|
|
|
|
|
| Blinking | The ZyAIR is sending/receiving data. |
|
|
|
|
| Orange | On | The ZyAIR has a successful 100Mbps WAN connection. |
|
|
|
|
|
| Blinking | The ZyAIR is sending/receiving data. |
|
|
|
|
SYS |
| Off | The ZyAIR is not ready or has malfunctioned. |
|
|
|
|
| Green | On | The ZyAIR is functioning properly. |
|
|
|
|
| Red | Blinking | The ZyAIR is rebooting. |
|
|
|
|
PWR |
| Off | The ZyAIR is not receiving power. |
|
|
|
|
| Green | On | The ZyAIR is receiving power. |
|
|
|
|
To access the ZyAIR, configure your computer’s IP address and subnet mask to be in the same range as the ZyAIR’s.
The default IP address of the ZyAIR is 192.168.1.1
3 Set Up Your Computer’s IP Address
The ZyAIR is already set up to assign your computer an IP address. Use this section to set up your computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254 range with a subnet mask of 255.255.255.0. This is necessary to ensure that your computer can communicate with your ZyAIR.
6