ZyXEL Communications G-2000s 3.2Checking/Updating Your Computer’s IP Address, 3.3Testing the Connection to the ZyAIR

ZyAIR G-2000 Plus Quick Start Guide

No gateways configured.

Figure 7 Advanced TCP/IP Settings

9.Click OK to close the Internet Protocol (TCP/IP) Properties window.

10.Click Close (OK in Windows 2000/NT) to close the Local Area Connection Properties window.

11.Close the Network Connections window (Network and Dial-up Connections in Windows 2000/NT).

3.2Checking/Updating Your Computer’s IP Address

1.In the computer, click Start, (All) Programs, Accessories and then Command Prompt.

2.In the Command Prompt window, type "ipconfig" and then press ENTER to verify that your computer’s static IP address is in the correct subnet (in the range between 192.168.1.2 and 192.168.1.254 if using the default ZyAIR LAN IP address). Alternatively, to have the ZyAIR assign your computer a new IP address (from the IP pool), make sure your ZyAIR is turned on, type "ipconfig/renew" and then press ENTER.

3.3Testing the Connection to the ZyAIR

1.Click Start, (All) Programs, Accessories and then Command Prompt.

2.In the Command Prompt window, type "ping 192.168.1.1” followed by a space and the IP address of the ZyAIR (192.168.1.1 is the default).

9