ZyXEL Communications G-220F 3.3.2.4 RADIUS

ZyXEL G-220F User’s Guide

3.3.2.4 RADIUS

Configure IEEE 802.1x security with various authentication methods in this screen.

Figure 20 Station Mode: Security Settings: RADIUS

The following table describes the labels in this screen.

Table 10 Station Mode: Security Settings: RADIUS

LABEL	DESCRIPTION
Authentication	Select an authentication method from the drop down list. Options are EAP-TLS
Type	and EAP-PEAP.
Login Name	Enter a user name.
	This is the user name that you or an administrator set up on a RADIUS server.
Password	This field is not available when you select EAP-TLSin the Authentication Type
	field.
	Enter the password associated with the user name above.
Certificate	This field is only available when you select EAP-TLSin the Authentication Type
	field.
	Specify the location and name of a certificate in the Certificate field or click
	Browse to locate it.
	Note: You must first have a wired connection to a network and
	obtain the certificate(s) from a certificate authority (CA).
	Consult your network administrator for more information.
Browse	This field is only available when you select EAP-TLSin the Authentication Type
	field.
	Click this button to display the Select Certificate screen, select a certificate and
	click OK.
Validate Server	Select the check box to check the certificate of the authentication server.
Certificate
PEAP Inner EAP	This field is only available when you select EAP-PEAPin the Authentication
	Type field.
	Use the drop-down list box to select a PEAP protocol. Options are MD5
	CHALLENGE, TOKEN CARD and MS CHAP v2.
Save	Click Save to save the changes back to the ZyXEL G-220F and display the Link
	Info screen. Otherwise, click the close ( ) button to discard changes and go
	back to the Site Survey screen.

Chapter 3 Wireless Station Mode Configuration 42