Manuals / Brands / Computer Equipment / Network Card / ZyXEL Communications / Computer Equipment / Network Card

ZyXEL Communications G-220F 4.3 The Configuration Screen, Configuration, ZyXEL Utility

1 104

Download 104 pages, 3.99 Mb

ZyXEL G-220F User’s Guide

Figure 29 Access Point Mode: Link Info

The following table describes the labels in this screen.

Table 15 Access Point Mode: Link Info

LABEL	DESCRIPTION

Status

SSID	This field displays the name that identifies your ZyXEL G-220F in the wireless LAN
	network.
Current Channel	This field displays the radio channel the ZyXEL G-220F is currently using.

Transmission Rate	This field displays the current transmission rate of the ZyXEL G-220F in megabits
	per second (Mbps).
Security	This field shows whether data encryption is activated (WEP) or inactive (Disabled).

MAC	This field displays the MAC address of the ZyXEL G-220F.

Output Power	This field shows the strength of the ZyXEL G-220F’s antenna gain or transmission
	power.
Association List	This table lists up to 16 wireless clients that are currently connected to the ZyXEL
	G-220F.
	denotes a wireless client without WEP security.
	denotes a wireless client with WEP security enabled.

MAC Address	This field displays the MAC addresses of a wireless client that is currently
	connected to the ZyXEL G-220F.
Refresh	Click Refresh to update this screen.

4.3 The Configuration Screen

Click Configuration in the ZyXEL Utility screen to display the screen as shown.

51	Chapter 4 Access Point Mode Configuration

Contents

User’s Guide Copyright Disclaimer Trademarks Federal Communications Commission (FCC) Interference Statement Notice Caution Certifications ZyXEL Limited Warranty Note Online Registration Customer Support Page Table of Contents Wireless Station Mode Configuration Maintenance Appendix A Appendix B Appendix C Appendix D Appendix E Page List of Figures Page List of Tables Page Preface About This User's Guide Related Documentation User Guide Feedback Syntax Conventions Graphics Icons Key Getting Started 1.1 About Your ZyXEL G-220F 1.1.1.1 Infrastructure 1.1.1.2 Ad-Hoc 1.1.1.3 Access Point Mode 1.2 ZyXEL G-220FHardware and Utility Installation 1.3 Configuration Methods 1.4 Windows XP Users Only 1.5 Accessing the ZyXEL Utility 1.6 Connecting to a Wireless LAN Security Settings 1.7 ZyXEL G-220FModes 1.8 ZyXEL Utility Screen Summary Page Wireless LAN Network 2.1 Wireless LAN Overview 2.2 Wireless LAN Security Overview 2.2.2.1 EAP Authentication 2.2.3.1 User Authentication 2.2.3.2 Encryption 2.2.4 WPA(2)-PSKApplication Example 2.2.5 WPA with RADIUS Application Example 2.3 Authentication Type 2.4Preamble Type 2.5 Introduction to OTIST 2.5.1.1 AP 2.5.1.2 Wireless Client 2.5.3Notes on OTIST Wireless Station Mode Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Access Point Mode Page Page Page Page Page Maintenance 5.1 The About Screen 5.2 Uninstalling the ZyXEL Utility 5.3 Upgrading the ZyXEL Utility Page Page Troubleshooting 6.1 Problems Starting the ZyXEL Utility Program 6.2 Problem Connecting to an Access Point 6.3 Problem with the Link Status 6.4 Problems Communicating With Other Computers Appendix A Product Specifications Page Appendix B Access Point Mode Setup Example Configuring the Computer on Which You Install the ZyXEL G- 220F Sharing Enable Internet Connection Sharing for this connection Configuring the Wireless Station Computer Page Via the Wireless Network System Tray Icon Wireless Network Connection Change advanced settings Related Tasks Wireless Networks Page Via the Control Panel Page Page Activating Wireless Zero Configuration Connecting to a Wireless Network Wireless Networks Wireless Network Connection Properties Refresh network list Refresh Available networks Configure Preferred Connect Security Settings Association Authentication Authentication Properties Smart Card or other Certificate Properties Ordering the Preferred Networks Wireless Networks Move up Move down Page Appendix E Types of EAP Authentication PEAP (Protected EAP) LEAP Dynamic WEP Key Exchange WPA Security Parameters Summary Appendix F Setting up Your Computer’s IP Address Windows 95/98/Me Installing Components Protocol Microsoft manufacturers TCP/IP Configuring IP Address Obtain an IP address automatically Specify an IP address Subnet Mask Windows 2000/NT/XP Network and Dial-up Connections 3Right-click Local Area Connection and then click Properties Internet Protocol (TCP/IP) General Use the following IP Address IP address Subnet mask Default gateway Advanced Macintosh OS 8/9 2Select Ethernet built-in from the Connect via list Using DHCP Server Configure: Macintosh OS Apply Now Page Index