ZyXEL G-220F User’s Guide

The following table describes the labels in this screen.

Table 13 Station Mode: Profile: Select a Channel

LABEL

DESCRIPTION

 

 

Wireless Settings

 

 

 

Channel

Select a channel number from the drop-down list box. To associate to an ad-hoc

 

network, you must use the same channel as the peer computer.

Wireless Mode

Select Mixed Mode to have the ZyXEL G-220F connect to either an IEEE 802.11g

 

or IEEE 802.11b wireless device.

 

Select G-Onlyto have the ZyXEL G-220F connect to an IEEE 802.11g wireless

 

device only and vice versa.

 

Select B-Onlyto have the ZyXEL G-220F connect to an IEEE 802.11b wireless

 

device only and vice versa.

3If you select Infrastructure network type in the first screen, select WEP, WPA-PSK, WPA-RADIUSor RADIUS from the drop-down list box to enable data encryption. If you select Ad-Hocnetwork type in the first screen, you can only use WEP encryption method. Otherwise, select Disabled to allow the ZyXEL G-220F to communicate with the access points or other peer wireless computers without any data encryption and skip to step 5.

Figure 24 Station Mode: Profile: Wireless Settings

4The screen varies depending on the encryption method you select in the previous screen. The settings must be exactly the same on the APs or other peer wireless computers as they are on the ZyXEL G-220F. Refer to Section 3.3.2 on page 38 for detailed information on wireless security configuration.

Chapter 3 Wireless Station Mode Configuration

46