ZyXEL Communications NSA210, NSA221, NSA310, NSA325 2.4 Main NAS Starter Utility Screen, NSA Seeker, Config Failed

Chapter 2 NAS Starter Utility for NSA221, NSA310, NSA320, and NSA325

2.4 Main NAS Starter Utility Screen

The main NAS Starter Utility screen displays after you select an NSA in the NSA Seeker screen. Figure 5 NAS Starter Utility Main Screen

The following table describes the labels in this screen.

Table 2 NAS Starter Utility Main Screen

LABEL	DESCRIPTION
?	Click this to display the utility help.
Configuration	Click this to run the initialization wizard (see the utility help for details), configure system
	settings (see Section 2.9 on page 29), or go to the NSA’s Web Configurator login screen
	(see Section 4.3 on page 49).
NAS Seeker	Click this to use the NSA Seeker screen (Section 2.3 on page 21) to find and connect to a
	different NSA on your network.
Server Name	This is the server name you configured for the NSA. If you have more than one NSA in
	your network, it is recommended that you give each one a unique name for identification
	purposes.
IP Address	This is the current IP address of the NSA.
MAC Address	This is the NSA’s unique physical hardware address (MAC).
Firmware Version	This shows the version of firmware the NSA is currently using.
Status	This shows whether the NSA is Online, Uninitialized, Unreachable, Configuring, or
	Config Failed.
Run Initialization	This button displays if the NSA detects an installed hard disk that the NSA has not yet
Wizard	configured. Click the button to run the initialization wizard (see the utility help for
	details).

	23
Media Server User’s Guide