Chapter 18 Maintenance Screens

 

 

 

 

Table 111 Maintenance > Power (continued)

 

LABEL

DESCRIPTION

 

Always

Select this option to keep the NSA operating as much of the time as possible. The NSA

 

Power On

restarts automatically even if it was turned off when the power failed.

 

 

 

 

Always

Select this option to keep the NSA from automatically restarting when the power is

 

Power Off

restored after a power failure. This is a computer’s “traditional” behavior. Select this if you

 

 

have other servers such as a domain controller or DNS server that you want to start or

 

 

check after a power failure before the NSA turns on.

 

 

 

 

Power On/Off Schedule

 

 

 

 

Enable Power

Select this option to have the NSA turn itself off and on or reboot according to the

 

Control Schedule

schedules you configured.

 

 

Click Edit to go to the screen where you can configure the power control schedules.

 

 

Refer to Section 18.3.2 on page 322 for this screen.

 

 

Note: This feature is not supported on NSA310.

 

 

 

 

Enable Wake On

Enable Wake On LAN to be able to turn on the NSA through its wired Ethernet connection.

 

LAN

You must have a computer or router on your LAN that supports sending Wake On LAN

 

 

 

 

“magic packets” to turn on the NSA.

 

 

To use Wake On LAN from a computer on your LAN, install a program such as Wake On LAN

 

 

EX or another Wake On LAN program that supports sending magic packets.

 

 

You can use Wake On LAN from a remote location if the router in front of the NSA supports

 

 

sending magic packets.

 

 

Use the NSA’s power button or the Web Configurator’s Maintenance > Shutdown menu

 

 

to turn off the NSA.

 

 

 

 

Apply

Click this to save your changes.

 

 

 

 

Reset

Click this to restore previously saved settings.

 

 

 

 

321

Media Server User’s Guide