Chapter 3 NAS Starter Utility for NSA210

After the NAS Starter Utility finishes configuring the NSA, you can click Show the directory of the NAS to see the NSA’s shares (see Section 3.5.3 on page 42) or click Finish to return to the main NAS Starter Utility screen (see Section 3.4 on page 33).

Figure 25 Setting the NAS

3.5.2Manual Configuration

1Set up the NSA’s basic network configuration first. Figure 26 Setup Network

The following table describes the labels in this screen.

Table 7 NAS Starter Utility > Config

LABEL

DESCRIPTION

Get IP

Select this if the NSA is automatically assigned an IP address from the ISP or a DHCP

automatically from

server in your network.

DHCP server

 

 

 

Assign IP Manually

Select this if you want to assign the NSA a fixed IP address, subnet mask and default

 

gateway.

 

Note: Do not configure an IP address that is already in use in your network. This results to

 

a network IP address conflict and makes the NSA inaccessible.

 

 

 

37

Media Server User’s Guide