Chapter 3 NAS Starter Utility for NSA210

Enter the administrator user name and password and click Login.

Figure 45 Login

See Section 4.5 on page 62 for more on the administration screens.

3.9 Configure Network Setting

Use these screens to change the NSA network settings such as the NSA’s name, IP address, subnet mask, default gateway, DNS, or PPPoE.

Click Configure network setting in the main utility screen to display the following screen.

Figure 46 NAS Starter Utility > Configure network setting

The following table describes the labels in this screen.

Table 8 NAS Starter Utility > Configure network setting

LABEL

DESCRIPTION

NAS Name

Specify a name to uniquely identify the NSA on your network. You can enter up to 15

 

alphanumeric characters with minus signs allowed but not as the last character. The

 

name must begin with an alphabetic character (a-z) and is case sensitive.

 

 

Get IP

Select this if the NSA is automatically assigned an IP address from the ISP or a DHCP

automatically from

server in your network.

DHCP server

 

 

 

Assign IP Manually

Select this if you want to assign the NSA a fixed IP address, subnet mask and default

 

gateway.

 

Note: Do not configure an IP address that is already in use in your network. This results to

 

a network IP address conflict and makes the NSA inaccessible.

 

 

 

45

Media Server User’s Guide