![](/images/backgrounds/126850/126850-372138x1.png)
Chapter 8 Wireless Screen
Table 25 Wireless: AP + Bridge
LABEL | DESCRIPTIONS |
Enable Antenna | (For |
Diversity | Select this to use antenna diversity. Antenna diversity uses multiple |
| |
| antennas to reduce signal interference. |
|
|
Enable Spanning | (R)STP (Section 8.3.1 on page 144) detects and breaks network |
Tree Control (STP) | loops and provides backup links between switches, bridges or |
| routers. It allows a bridge to interact with other (R)STP |
| bridges in your network to ensure that only one path exists between |
| any two stations on the network. Select the check box to activate |
| STP on the NWA. |
|
|
Enable Roaming | Roaming allows wireless stations to switch from one access point to |
| another as they move from one coverage area to another. Select this |
| checkbox to enable roaming on the NWA if you have two or more |
| NWAs on the same subnet. |
| Note: All APs on the same subnet and the wireless stations must |
| have the same SSID to allow roaming. |
|
|
Apply | Click Apply to save your changes. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
138 |
| |
| ||
|
|
|