Chapter 3 Tutorials
4In the screen that opens, choose the radio profile for each WLAN radio and click Apply.
Figure 52 Tutorial: Managed AP WLAN Radio Profile
In this example, the 1st floor NWA managed AP uses radio06 for its WLAN1 Radio Profile.
3.6.7 Checking your Settings and Testing the Configuration
The NWAs should be working at this point. You can configure the settings of each NWA unit by just opening the Web Configurator of the primary controller AP.
One way to test if the setup is working is to use a wireless client to check if all the profiles you have set up in the managed APs and the controller APs are available for wireless connection.
For this example, we use the
Figure 53 Tutorial: Checking your Setup (MGNT Mode Settings)
76 |
| |
| ||
|
|
|