Chapter 6 AP Controller Mode
Table 17 Radio Edit Screen
LABEL | DESCRIPTION |
MCS Table | The MCS Rate table is available only when 802.11n/g or |
| 802.11n/a is selected as the 802.11 Radio Mode. |
| IEEE 802.11n supports many different data rates which are called |
| MCS rates. MCS stands for Modulation and Coding Scheme. This |
| is an 802.11n feature that increases the wireless network |
| performance in terms of throughput. |
| For each MCS Rate |
| the NWA use the data rate. Select Disable if you do not want the |
| NWA to use the data rate. |
|
|
Select SSID Profile | Use this section to choose the SSID profile or profiles you want |
| access points using this radio profile to use. Each AP can use |
| multiple SSID profiles simultaneously. |
| Configure SSID profiles in the Profile Edit > SSID screens. |
|
|
Enable Antenna | (For |
Diversity | Select this to use antenna diversity. Antenna diversity uses |
| |
| multiple antennas to reduce signal interference. |
|
|
Apply | Click Apply to save your changes. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
108 |
| |
| ||
|
|
|