Chapter 8 Wireless Screen
•The adjacent access points should use different radio channels when their coverage areas overlap.
•All access points must use the same port number to relay roaming information.
•The access points must be connected to the Ethernet and be able to get IP addresses from a DHCP server if using dynamic IP address assignment.
To enable roaming on your NWA, click WIRELESS > Wireless. The screen appears as shown.
Figure 81 Enabling Roaming
Select the Enable Roaming check box and click Apply.
Note: Roaming cannot be enabled in Bridge / Repeater mode.
148 |
| |
| ||
|
|
|