Chapter 3 Phone Use and Configuration
Figure 8 Advanced SIP Settings (part 4)
The following table describes the labels in this screen.
Table 5 SIP Setting
LABEL | DESCRIPTION |
Codec Setting |
|
|
|
Type | This lists the available voice codecs. |
|
|
Priority | Use this section to indicate the codec priority. |
| Codecs are engaged in order of priority from 1 to 8, with 1 being the |
| highest on the list. The ZyXEL Device cycles through the codecs until it |
| finds one that matches the device of the other party in the telephone |
| conversation. If the ZyXEL Device does not have any codecs in common |
| with the other device then the call is dropped. |
|
|
Mode | Select a pulse code modulation for the G.723 codec. |
|
|
Back | Click this to return to the previous screen with saving your changes. |
|
|
Apply | Click this to save your changes and then return to the previous screen. |
|
|
Reset | Click this to reset the options in this screen to their last saved settings. |
|
|
3.4 Speed Dial Settings
Click VoIP > Phone Book > Speed Dial to open this screen. This is where you can store
When you press a speed dial number on your phone, the telephone number is dialed automatically. For example, if you configure speed dial number ‘#01’ with
24 |
| |
| ||
|
|
|