Chapter 4 Maintenance
Click Maintenance > System > General to open this screen.
Figure 11 System General
The following table describes the labels in this screen.
Table 9 System General
LABEL | DESCRIPTION |
System Setup |
|
|
|
Mode | Select Router to set the ZyXEL Device to router mode. |
| Select Bridge and configure the Manager IP Address to set the |
| ZyXEL Device to bridge mode. |
|
|
Administrator | Type how many minutes a management session (either via the web |
Inactivity Timer | configurator or telnet) can be left idle before the session times out. The |
| default is 5 minutes. After it times out you have to log in with your |
| password again. Very long idle timeouts may have security risks. A |
| value of "0" means a management session never times out, no matter |
| how long it has been left idle (not recommended). |
|
|
Manager IP | Enter the management IP address of the ZyXEL Device if it is in bridge |
Address | mode. |
|
|
Administrator/User Account | |
|
|
User Name | Type the user name you use to access the system. |
|
|
User Password | Type your new system password (up to 30 characters). Note that as you |
| type a password, the screen displays a dot for each character you type. |
| After you change the password, use the new password to access the |
| ZyXEL Device. |
|
|
Apply | Click this to save your changes and then return to the previous screen. |
|
|
Reset | Click this to reset the options in this screen to their defaults. |
|
|
32 |
| |
| ||
|
|
|