Chapter 3 Phone Use and Configuration
The following table describes the labels in this screen.
Table 7 Dial Plan with URL
LABEL | DESCRIPTION |
Index | This indicates the index number of each entry. |
|
|
Port Setting | Select the phone port you want to configure here. |
| |
|
|
SIP Number | Enter the SIP number you want the ZyXEL Device to call. |
|
|
Destination | Enter the IP address or domain name of the party you want to call when |
| you dial the corresponding SIP number to make a |
|
|
Active | Check this to select an entry so it can be enabled, removed or moved |
| up/down. |
|
|
Remove | Click this to clear the settings for the selected entry(ies). |
Selected |
|
|
|
Remove All | Click this to clear the settings for all entries. |
|
|
| Click the icon to change the position of an entry in the list. |
|
|
Apply | Click this to save your changes and then return to the previous screen. |
|
|
Reset | Click this to reset the options in this screen to their defaults. |
|
|
3.6 Supported Phone Functions
The following table shows the key combinations you can enter on your phone's keypad to use certain features after you pick up the phone's receiver.
Note: After pressing the flash key, if you do not issue the
Note: If the flash key is not available, you can tap (press and immediately release) the hook by hand to achieve the same effect.
Table 8 Call Features
FUNCTION | KEY | USA | EUROPE (DEFAULT) | ||
COMBINATIONS | |||||
FLASH | 1. | Put the current call on hold | 1. | Put the current call on hold | |
Retrieve |
|
| and create a dial tone. |
| and create a dial tone. |
|
| 2. | Switch back and forth | 2. | Switch back to the first call |
|
|
| between two calls. |
| (if there is no second call). |
|
|
|
|
| |
| FLASH 0 |
|
| Drop a call previously put on | |
|
|
|
| hold. | |
|
|
|
|
| |
| FLASH 1 |
|
| Drop the current call and | |
|
|
|
| resume a call previously put | |
|
|
|
| on hold. | |
|
|
|
|
|
|
| 27 |
|
|