|
| |
| Figure 73 Menu 11.1 Remote Node Profile |
|
|
|
|
| Menu 11.1 - Remote Node Profile |
|
| Rem Node Name= MyISP | Route= IP |
| Active= Yes | Bridge= No |
| Encapsulation= RFC 1483 | Edit IP/Bridge= No |
| Multiplexing= | Edit ATM Options= No |
| Service Name= N/A | Edit Advance Options= N/A |
| Incoming: | Telco Option: |
| Rem Login= N/A | Allocated Budget(min)= N/A |
| Rem Password= N/A | Period(hr)= N/A |
| Outgoing: | Schedule Sets= N/A |
| My Login= N/A | |
| My Password= N/A | Session Options: |
| Authen= N/A | Edit Filter Sets= No |
|
| Idle Timeout(sec)= N/A |
Press ENTER to Confirm or ESC to Cancel:
In Menu 11.1 – Remote Node Profile, fill in the fields as described in the following table.
Table 44 Menu 11.1 Remote Node Profile
FIELD | DESCRIPTION |
|
|
Rem Node Name | Type a unique, descriptive name of up to eight characters for this node. |
|
|
Active | Press [SPACE BAR] and then [ENTER] to select Yes to activate or No to |
| deactivate this node. Inactive nodes are displayed with a minus sign |
| menu 11. |
Encapsulation | PPPoA refers to |
| If |
| ENCAP are selected, |
| then the Rem Login, Rem Password, My Login, My Password and Authen |
| fields are not applicable (N/A). |
Multiplexing | Press [SPACE BAR] and then [ENTER] to select the method of multiplexing that |
| your ISP uses, either |
Service Name | When using PPPoE encapsulation, type the name of your PPPoE service here. |
|
|
Incoming: |
|
|
|
Rem Login | Type the login name that this remote node will use to call your Prestige. The login |
| name and the Rem Password will be used to authenticate this node. |
Rem Password | Type the password used when this remote node calls your Prestige. |
|
|
Outgoing: |
|
|
|
My Login | Type the login name assigned by your ISP when the Prestige calls this remote |
| node. |
My Password | Type the password assigned by your ISP when the Prestige calls this remote |
| node. |
Chapter 18 Remote Node Configuration | 144 |