LOG MESSAGE | DESCRIPTION |
|
|
board%d line%d channel%d, | The router received the setup requirements for a call. “call” is |
call%d,%s C01 Outgoing Call | the reference (count) number of the call. “dev” is the device |
dev=%x ch=%x%s | type (3 is for |
| "channel" or “ch” is the call channel ID.For example,"board 0 |
| line 0 channel 0, call 3, C01 Outgoing Call dev=6 ch=0 |
| "Means the router has dialed to the PPPoE server 3 times. |
board%d line%d channel%d, | The PPPoE, PPTP or |
call%d,%s C02 OutCall |
|
Connected%d%s |
|
board%d line%d channel%d, | The PPPoE, PPTP or |
call%d,%s C02 Call Terminated |
|
LOG MESSAGE | DESCRIPTION |
|
|
ppp:LCP Starting | The PPP connection’s Link Control Protocol stage has started. |
ppp:LCP Opening | The PPP connection’s Link Control Protocol stage is opening. |
ppp:CHAP Opening | The PPP connection’s Challenge Handshake Authentication Protocol stage is |
| opening. |
ppp:IPCP Starting | The PPP connection’s Internet Protocol Control Protocol stage is starting. |
ppp:IPCP Opening | The PPP connection’s Internet Protocol Control Protocol stage is opening. |
ppp:LCP Closing | The PPP connection’s Link Control Protocol stage is closing. |
ppp:IPCP Closing | The PPP connection’s Internet Protocol Control Protocol stage is closing. |
Table 105 | ICMP Notes | ||
|
|
|
|
TYPE |
| CODE | DESCRIPTION |
|
|
|
|
0 |
|
| Echo Reply |
|
| 0 | Echo reply message |
3 |
|
| Destination Unreachable |
|
| 0 | Net unreachable |
|
| 1 | Host unreachable |
|
| 2 | Protocol unreachable |
|
| 3 | Port unreachable |
|
| 4 | A packet that needed fragmentation was dropped because it was set to Don't |
|
|
| Fragment (DF) |
|
| 5 | Source route failed |
Appendix F Log Descriptions | 290 |