code checksum, DSP RAM memory, EEPROM, digital circuits, and the analog circuit calibrations.

Results of the power-on self-test displayed on your terminal:

0

SYSTEM TESTING

Self-test indicator. If no error occurs,

 

....

this message will last until the end of the

 

 

test.

1

ROM TEST FIAL....

ROM code checksum error.

2

RAM TEST FAIL....

System RAM fails.

3

LOADING

EEPROM checksum error. The factory

 

DEFAULTS.

default settings will be downloaded to

 

 

the EEPROM and the self-test will be

 

 

re-initiated. This is not a real error.

4

DSP RAM FIAL...

The testing of DSP RAM fails, condition

 

 

A.

5

DSP RAM FIAL...

The testing of DSP RAM fails, condition

 

 

A.

6

VO CALIBRATION

Analog circuit calibration error.

 

FAIL...

 

7

VR CALIBRATION

Analog circuit calibration error.

 

FAIL...

 

8

FR CALIBRATION

Analog circuit calibration error.

 

FAIL....

 

Resetting The Modem

A reset command from the panel will restart the power-on self-test. If an error message is displayed on the screen, turn off the modem, wait for at least 10 seconds, and then turn the power on again. If the error condition persists, call the ZyXEL Service Center for assistance, or follow the return procedure to return the modem to ZyXEL. If the normal IDLE SCREEN shows up, the original failure was due to a

Diagnostics & Troubleshooting 129

Page 143
Image 143
ZyXEL Communications U-336SA user manual Resetting The Modem

U-336S, U-336SA specifications

ZyXEL Communications, a leading global provider of networking and cybersecurity solutions, has offered a range of products designed to cater to various connectivity needs. Among these, the U-336SA and U-336S modems stand out for their reliability and performance, particularly in the dial-up category during the heyday of internet access.

The U-336SA and U-336S modems are external devices that revolutionized the way users connected to the internet in the late 1990s and early 2000s. Designed for both home users and small businesses, these modems supported 33.6 Kbps data transfer rates, which, at the time, were considered cutting-edge. This capability allowed for reasonably swift internet browsing, email communication, and file downloads compared to earlier modems.

One notable feature of both the U-336SA and U-336S models is their plug-and-play functionality. This ease of use made them accessible to even the less tech-savvy users, allowing quick and straightforward installation. Users could connect the modems to their PCs or laptops via a standard serial interface, minimizing setup time and complexity.

Additionally, both modems were equipped with error correction and data compression technologies. The V.42 and V.42bis protocols enhanced data integrity during transmission, ensuring that users experienced fewer disruptions and greater reliability in their connecting experience. This was particularly vital for tasks like file transfers and large downloads, where data integrity was paramount.

The modems also featured compatibility with various operating systems, including early versions of Windows, which expanded their appeal to a broader audience. The U-336SA was specifically engineered as a standalone device, while the U-336S could often be used with existing computer systems, showcasing versatility in various deployment scenarios.

In terms of design, both modems were compact and lightweight, allowing for easy portability. This made them suitable for users who required connectivity on the go or in different locations.

Ultimately, the ZyXEL U-336SA and U-336S modems represent a significant technological achievement in the history of internet connectivity. Their introduction set the stage for subsequent advancements in modem technology and played a crucial role in the evolution towards broadband and high-speed internet access that we enjoy today. Their legacy endures in the foundational technologies and protocols that continue to drive modern telecommunications.