![](/images/new-backgrounds/1173373/17337391x1.webp)
Dial Memory
The first menu in the dialing directory is DIAL MEMORY. Pressing the ENTER key will display the following screen:
z#00:12345
<<>> SELECT MEMORY Equivalent AT Commands:
<ENTER>
Dial out the number
AT&Z?
ATDSn
View all stored phone numbers.
n = 0 - 49; dial stored number.
The first stored number shown on the menu is the default dial number which can be selected from the DEFAULT DIAL menu. By pressing the left or right arrow key, you can view up to 50 different numbers stored in the memory. Pressing the ENTER key will cause the selected number to be dialed. The first line of the LCD can display up to 16 characters. However, up to 25 characters can be entered. Characters 17 through 25 are displayed on the second line of the LCD display.
Storing a Number
Pressing the right arrow key from the DIAL MEMORY display will move the menu to STORE NUMBER. Pressing the ENTER key at this point will produce the following screen display:
z#00: 12345
<< >> SELECT MEMORY
Changing an existing number:
z#00:1234567
<< >> SELECT MEMORY
<ENTER>
<ENTER>
z#00:
<< >> SELECT DIGIT
z#00:
<< >> SELECT DIGIT