Command

Value

Description

+FNS="string"

 

Non-standard byte string parameter.

 

 

"string": string of hexadecimal coded

 

 

octets.

+FPI="string"

 

Local fax station ID string, for polling Rx.

+FPR=n

 

Serial port rate control parameter:

 

n=0

Automatic DTE rate detection by the

 

 

DCE.

 

n>0

Serial rate is fixed at the value multiplied

 

 

by 2400 bps. For example, when n=8, the

 

 

DTE rate is equal to 19200 bps (8x2400).

+FPS=n

 

Page transfer status: refer to the +FPTS

 

 

Class 2 command in previous sections for

 

 

settings.

+FRQ=pgl,cbl

 

Receiving quality threshold parameters:

 

pgl=

Specify the percentage of good lines (e.g.

 

0-64

with negotiated number of pixels) required

 

(HEX

for a page considered acceptable. The

 

value)

percentage of good lines would be

 

 

computed by the equation:

 

 

100 x (<lc> - <bl>) / <lc>

 

 

lc: total line count as reported in the +FPS:

 

 

response.

 

 

bl: bad line count as reported in the +FPS:

 

 

response.

 

 

If the resulting value is less than the value

 

 

in <pgl>, the page is unacceptable.

 

cbl=

Specify the maximum tolerable number of

 

0-FF

consecutive bad lines. If this value is

 

(HEX

exceeded for a given page, the DCE shall

 

value)

consider the page unacceptable.

+FSP=n

 

Enable polling command:

78 Fax Operation

Page 92
Image 92
ZyXEL Communications U-336SA user manual Dce, Hex

U-336S, U-336SA specifications

ZyXEL Communications, a leading global provider of networking and cybersecurity solutions, has offered a range of products designed to cater to various connectivity needs. Among these, the U-336SA and U-336S modems stand out for their reliability and performance, particularly in the dial-up category during the heyday of internet access.

The U-336SA and U-336S modems are external devices that revolutionized the way users connected to the internet in the late 1990s and early 2000s. Designed for both home users and small businesses, these modems supported 33.6 Kbps data transfer rates, which, at the time, were considered cutting-edge. This capability allowed for reasonably swift internet browsing, email communication, and file downloads compared to earlier modems.

One notable feature of both the U-336SA and U-336S models is their plug-and-play functionality. This ease of use made them accessible to even the less tech-savvy users, allowing quick and straightforward installation. Users could connect the modems to their PCs or laptops via a standard serial interface, minimizing setup time and complexity.

Additionally, both modems were equipped with error correction and data compression technologies. The V.42 and V.42bis protocols enhanced data integrity during transmission, ensuring that users experienced fewer disruptions and greater reliability in their connecting experience. This was particularly vital for tasks like file transfers and large downloads, where data integrity was paramount.

The modems also featured compatibility with various operating systems, including early versions of Windows, which expanded their appeal to a broader audience. The U-336SA was specifically engineered as a standalone device, while the U-336S could often be used with existing computer systems, showcasing versatility in various deployment scenarios.

In terms of design, both modems were compact and lightweight, allowing for easy portability. This made them suitable for users who required connectivity on the go or in different locations.

Ultimately, the ZyXEL U-336SA and U-336S modems represent a significant technological achievement in the history of internet connectivity. Their introduction set the stage for subsequent advancements in modem technology and played a crucial role in the evolution towards broadband and high-speed internet access that we enjoy today. Their legacy endures in the foundational technologies and protocols that continue to drive modern telecommunications.