ZyXEL Communications U-336SA user manual +Fbadlin=, +Fbuf?, +Fcon

Command	Value	Description
+FBADLIN=	0-255	Bad line threshold (number of
<value>		consecutive bad lines for a bad page
		parameter):
		Determine if Copy Quality OK on the
		T.30 flow chart . <value>=0 to 255; a
		value of 0 implies that error checking is
		disabled.
+FBOR=n		Phase C data bit order:
	n=0	Select direct bit order.
	n=1	Select reversed bit order in receiving
		mode for phase C data.
+FBUF?		Buffer size; read only parameter:
		Allow DTE to determine the
		characteristics of the DCE’s buffer size.
+FCIG="string"		Local fax station ID string, for polling Rx.
+FCLASS=n		Service class selection: Refer to
		+FCLASS Class 1 command in previous
		section.
+FCON		DCE responds fax connection .
+FCQ=n		Copy quality check capability parameter
	n=0	No copy quality check capability.
	n=1	Only check 1D phase C data.
	n=2	Check both 1D and 2D phase C data.
+FCR=n		"Capability to receive" parameter
	n=0	DCE will not receive message data or
		poll a remote device.
	n=1	DCE receives message data or polls a
		remote device.
+FDCC=vr,br,wd		DCE capabilities parameters.
,ln,df,ec,bf,st
	vr=0	Vertical resolution: Normal; 98 lpi.

Fax Operation 69