![](/images/new-backgrounds/1173373/173373171x1.webp)
Command | Value | Description | |
+FMFR? |
| Request DCE manufacturer . | |
+FMINSP=n |
| Minimum phase C speed parameter: | |
| n=0 | 2400 bps. | |
| n=1 | 4800 bps. | |
| n=2 | 7200 bps. | |
| n=3 | 9600 bps. | |
| n=4 | 12000 bps. | |
| n=5 | 14400 bps. | |
+FPHCTO= | DTE Phase C response | ||
<value> |
| Determine how long the DCE will wait | |
|
| for a command after reaching the end of | |
|
| data when transmitting in Phase C. | |
|
| <value>=0 to 255; 100 ms units. | |
+FPTS=n |
| Page transfer status | |
| n=1 | Received page good. | |
| n=2 | Page | bad; retrain requested. |
| n=3 | Page | good; retrain requested. |
| n=4 | Page | bad; procedure interrupt |
|
| requested. | |
| n=5 | Page | good; procedure interrupt |
|
| requested. | |
+FREL=n |
| Phase C received EOL alignment: | |
| n=0 | The EOL patterns are bit aligned as | |
|
| received. | |
| n=1 | The last received bits of EOL patterns | |
|
| are byte aligned by the DCE, with | |
|
| necessary zero fill bits inserted. Refer to | |
|
| TIA | |
+FREV? |
| Request the DCE revision identification. | |
+FSPL=n |
| "Enable polling" command: | |
| n=0 | Disable polling. |