Husqvarna 555, 562XPG, 556, 560XP Air Injection centrifugal cleaning, Winter use, Heated handles

Page 36

MAINTENANCE

”Air Injection” centrifugal cleaning

Centrifugal cleaning means the following: All air to the carburettor passes through the starter. Dirt and dust is centrifuged out by the cooling fan.

IMPORTANT! In order to maintain operation of the centrifugal cleaning system it must be regularly maintained. Clean the air intake to the starter, the fins on the flywheel, the space around the flywheel, inlet pipe and carburettor compartment.

Winter use

Running problems can occur when using the machine in the cold and snowy conditions caused by:

•Too low engine temperature.

•Icing of the air filter and carburettor. Special measures are therefore often required:

•Partly mask the air inlet on the starter to increase the working temperature of the engine.

•Preheat the intake air to the carburettor by using the heat from the cylinder.

Temperature 0°C or colder

The intermediate wall is designed so it can be adjusted for running in cold weather, so that preheated air from the cylinder can pass into the carburettor space preventing icing of the air filter, etc. Lift off the air filter to obtain better access. Use a screwdriver to carefully knock away the plug in the partition.

For temperatures below -5°C and/or in snow conditions a special cover is available, which is mounted on the starter housing.

Part number: 522 98 65-02.

These reduce the flow of cooling air and prevent large amounts of snow from being sucked into the carburettor space.

IMPORTANT! If the temperature rises above -5°C or 0°C respectively, the starter housing cover MUST be removed and the accompanying plug, art. no. 503 40 59-01 fitted in the hole in the partition wall. Otherwise there is a risk of overheating, resulting in severe damage to the engine.

Heated handles

560XPG, 562XPG

On models with the model code XPG both the front handle bar and the rear handle are equipped with electrical heating coils. These are supplied with electricity from a generator built into the chain saw.

When the switch is pushed upwards, the heat is switched on. When the switch is pushed downwards, the heat is switched off.

Electrical carburettor heating

560XPG, 562XPG

On models with the designation XPG there is an electrically heated carburettor. Electrically powered heating prevents ice formation in the carburettor. A thermostat regulates the heating so that the carburettor always has the right working temperature.

36 – English

Page 35 Page 37
Image 36
Page 35 Page 37
Contents 555 556 560XP 560XPG 562XP 562XPG KEY to Symbols Symbols on the machineSymbols in the operator’s manual Contents Introduction Dear CustomerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawMachine′s safety equipment Always use common sensePersonal protective equipment Chain brake and front hand guardGeneral Safety Precautions Throttle trigger lockout Chain catcherRight hand guard Vibration damping systemStop switch Cutting equipmentMuffler General rulesCutting equipment designed to reduce kickback Guide barSaw chain Sharpening your chain and adjusting depth gauge setting General advice on adjusting depth gauge settingGeneral information on sharpening cutting teeth Increases the risk of kickbackIncreased if the depth gauge setting is Adjustment of depth gauge settingTensioning the chain Too largeLubricating cutting equipment Needle bearing lubrication Checking wear on cutting equipmentAssembly Fitting the bar and chainFitting a spike bumper Working with the chainFuel Handling FuelFuel safety FuelingTransport and storage Long-term storageStarting and Stopping Starting and stoppingStarting Stopping Basic safety rules Working TechniquesBefore use General working instructionsClutch cover causing the chain to CleaningJam. Always stop the engine before Basic cutting technique TermsTree felling technique LimbingLogs are lying together. Such Or fatal injuryFelling direction Clearing the trunk and preparing your retreatDirectional cuts Felling cut How to avoid kickback What is kickback?Freeing a tree that has fallen badly Cutting the trunk into logs Maintenance Carburettor adjustmentGeneral Checking the inertia brake release Muffler Starter housing Changing a broken or worn starter cordTensioning the recoil spring Changing a broken recoil springAir filter Spark plugFitting the starter Adjustment of the oil pump Lubricating the bar tip sprocketNeedle bearing lubrication Cooling systemAir Injection centrifugal cleaning Temperature 0C or colderWinter use Heated handlesMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical data560XPG 562XP 562XPG Engine Guide bar and saw chain combinations Saw chain filing and file gaugesEC Declaration of Conformity Applies to Europe onlyEN ISO 121002010, ISO 149822009, EN ISO Page Page Original instructions 1156729-26

560XPG, 560XP, 556, 562XPG, 562XP specifications

The Husqvarna 562XPG, 555, 560XP, 562XP, and 560XPG are part of Husqvarna’s acclaimed line of professional chainsaws known for their power, efficiency, and ergonomic design. Each model caters to the specific needs of forestry professionals, loggers, and serious outdoor enthusiasts.

Starting with the Husqvarna 562XPG, this chainsaw is designed for high-performance cutting in demanding conditions. It features a powerful and efficient X-Torq engine that delivers high torque over a wide RPM range, reducing fuel consumption and emissions. The 562XPG also includes heated handles, which provide additional comfort during cold weather operations. This model is equipped with the AutoTune technology that automatically adjusts the engine settings to varying conditions, ensuring optimal performance without the need for manual tuning.

Next in line is the Husqvarna 555, a robust chainsaw that strikes a balance between power and weight. It is also equipped with the X-Torq engine, making it both fuel-efficient and environmentally friendly. The 555 features an innovative air injection system that removes large debris particles before they enter the air filter, ensuring a longer air filter life and reliable performance. Its lightweight design and excellent balance make it easy to control, even during extended use.

The Husqvarna 560XP is another powerful option, particularly favorable for tree cutting and harvesting. It boasts a professional-grade engine with a higher RPM capacity and advanced air management, maximizing efficiency and cutting speed. Its ergonomic design incorporates features like a low-vibration system and an adjustable oil pump, which improves user comfort and allows for optimal chain lubrication.

The 562XP is similar to the 562XPG but without the heated handles, providing an excellent choice for users who prioritize performance in milder climates. Its lightweight construction coupled with a slim design enhances maneuverability, making it ideal for both professional use and meticulous backyard projects.

Lastly, the Husqvarna 560XPG combines the features of the XP models with the added benefit of heated handles. This saw is engineered for rigorous tasks, featuring robust construction and advanced features like the LowVib system that effectively reduces vibrations. This model is well-suited for those who face harsh weather conditions, ensuring maximum comfort and efficiency in the field.

Collectively, these Husqvarna models represent the pinnacle of modern chainsaw technology, showcasing features that emphasize performance, user comfort, and reliability for all kinds of challenging cutting tasks. Whether you are a professional logger or a passionate homeowner, there is a Husqvarna model to meet your needs.
Top Page Image Contents