Husqvarna 555, 562XPG, 556, 560XP manual General Safety Precautions, Before using a new chain saw

Page 7

GENERAL SAFETY PRECAUTIONS

Before using a new chain saw

•Please read this manual carefully.

•Check that the cutting equipment is correctly fitted and adjusted. See instructions under the heading Assembly.

•Refuel and start the chain saw. See the instructions under the headings Fuel Handling and Starting and Stopping.

•Do not use the chain saw until sufficient chain oil has reached the chain. See instructions under the heading Lubricating cutting equipment.

•Long-term exposure to noise can result in permanent hearing impairment. So always use approved hearing protection.

!

WARNING! Under no circumstances may

the design of the machine be modified

 

 

without the permission of the

 

manufacturer. Always use original

 

accessories. Non-authorized

 

modifications and/or accessories can

 

result in serious personal injury or the

 

death of the operator or others.

!

WARNING! A chain saw is a dangerous

tool if used carelessly or incorrectly and

 

 

can cause serious, even fatal injuries. It

 

is very important that you read and

 

understand the contents of this

 

operator’s manual.

!

WARNING! The inside of the muffler

contain chemicals that may be

 

 

carcinogenic. Avoid contact with these

 

elements in the event of a damaged

 

muffler.

!

WARNING! Long term inhalation of the

engine’s exhaust fumes, chain oil mist

 

and dust from sawdust can represent a

 

health risk.

!

WARNING! This machine produces an

electromagnetic field during operation.

 

 

This field may under some

 

circumstances interfere with active or

 

passive medical implants. To reduce the

 

risk of serious or fatal injury, we

 

recommend persons with medical

 

implants to consult their physician and

 

the medical implant manufacturer before

 

operating this machine.

!

WARNING! Never allow children to use or

be in the vicinity of the machine. As the

 

 

machine is equipped with a spring-

 

loaded stop switch and can be started by

 

low speed and force on the starter

 

handle, even small children under some

 

circumstances can produce the force

 

necessary to start the machine. This can

 

mean a risk of serious personal injury.

 

Therefore remove the spark plug cap

 

when the machine is not under close

 

supervision.

Important

IMPORTANT!

This chain saw for forest service is designed for forest work such as felling, limbing and cutting.

National regulation can restrict the use of the machine.

You should only use the saw with the bar and chain combinations we recommend in the chapter Technical data.

Never use the machine if you are fatigued, while under the influence of alcohol or drugs, medication or anything that could affect your vision, alertness, coordination or judgement.

Wear personal protective equipment. See instructions under the ”Personal protective equipment” heading.

Do not modify this product or use it if it appears to have been modified by others.

Never use a machine that is faulty. Carry out the safety checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the Maintenance heading.

Never use any accessories other than those recommended in this manual. See instructions under the headings Cutting equipment and Technical data.

CAUTION! Always wear protective glasses or a face visor to reduce the risk of injury from thrown objects. A chain saw is capable of throwing objects, such as wood chips, small pieces of wood, etc, at great force. This can result in serious injury, especially to the eyes.

!

WARNING! Running an engine in a

confined or badly ventilated area can

 

 

result in death due to asphyxiation or

 

carbon monoxide poisoning.

!

WARNING! Faulty cutting equipment or

the wrong combination of bar and saw

 

 

chain increases the risk of kickback!

 

Only use the bar/saw chain combinations

 

we recommend, and follow the filing

 

instructions. See instructions under the

 

heading Technical data.

English – 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 555 556 560XP 560XPG 562XP 562XPG Symbols on the machine KEY to SymbolsSymbols in the operator’s manual Contents Dear Customer IntroductionWhat is what on the chain saw? What is WHAT?Before using a new chain saw General Safety PrecautionsChain brake and front hand guard Machine′s safety equipmentAlways use common sense Personal protective equipmentGeneral Safety Precautions Vibration damping system Throttle trigger lockoutChain catcher Right hand guardGeneral rules Stop switchCutting equipment MufflerGuide bar Cutting equipment designed to reduce kickbackSaw chain Increases the risk of kickback Sharpening your chain and adjusting depth gauge settingGeneral advice on adjusting depth gauge setting General information on sharpening cutting teethToo large Increased if the depth gauge setting isAdjustment of depth gauge setting Tensioning the chainLubricating cutting equipment Checking wear on cutting equipment Needle bearing lubricationWorking with the chain AssemblyFitting the bar and chain Fitting a spike bumperFuel Fuel HandlingLong-term storage Fuel safetyFueling Transport and storageStarting and stopping Starting and StoppingStarting Stopping General working instructions Basic safety rulesWorking Techniques Before useCleaning Clutch cover causing the chain toJam. Always stop the engine before Terms Basic cutting techniqueOr fatal injury Tree felling techniqueLimbing Logs are lying together. SuchClearing the trunk and preparing your retreat Felling directionDirectional cuts Felling cut What is kickback? How to avoid kickbackFreeing a tree that has fallen badly Cutting the trunk into logs Carburettor adjustment MaintenanceGeneral Checking the inertia brake release Muffler Changing a broken recoil spring Starter housingChanging a broken or worn starter cord Tensioning the recoil springSpark plug Air filterFitting the starter Cooling system Adjustment of the oil pumpLubricating the bar tip sprocket Needle bearing lubricationHeated handles Air Injection centrifugal cleaningTemperature 0C or colder Winter useDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical Data560XPG 562XP 562XPG Engine Saw chain filing and file gauges Guide bar and saw chain combinationsApplies to Europe only EC Declaration of ConformityEN ISO 121002010, ISO 149822009, EN ISO Page Page Original instructions 1156729-26

560XPG, 560XP, 556, 562XPG, 562XP specifications

The Husqvarna 562XPG, 555, 560XP, 562XP, and 560XPG are part of Husqvarna’s acclaimed line of professional chainsaws known for their power, efficiency, and ergonomic design. Each model caters to the specific needs of forestry professionals, loggers, and serious outdoor enthusiasts.

Starting with the Husqvarna 562XPG, this chainsaw is designed for high-performance cutting in demanding conditions. It features a powerful and efficient X-Torq engine that delivers high torque over a wide RPM range, reducing fuel consumption and emissions. The 562XPG also includes heated handles, which provide additional comfort during cold weather operations. This model is equipped with the AutoTune technology that automatically adjusts the engine settings to varying conditions, ensuring optimal performance without the need for manual tuning.

Next in line is the Husqvarna 555, a robust chainsaw that strikes a balance between power and weight. It is also equipped with the X-Torq engine, making it both fuel-efficient and environmentally friendly. The 555 features an innovative air injection system that removes large debris particles before they enter the air filter, ensuring a longer air filter life and reliable performance. Its lightweight design and excellent balance make it easy to control, even during extended use.

The Husqvarna 560XP is another powerful option, particularly favorable for tree cutting and harvesting. It boasts a professional-grade engine with a higher RPM capacity and advanced air management, maximizing efficiency and cutting speed. Its ergonomic design incorporates features like a low-vibration system and an adjustable oil pump, which improves user comfort and allows for optimal chain lubrication.

The 562XP is similar to the 562XPG but without the heated handles, providing an excellent choice for users who prioritize performance in milder climates. Its lightweight construction coupled with a slim design enhances maneuverability, making it ideal for both professional use and meticulous backyard projects.

Lastly, the Husqvarna 560XPG combines the features of the XP models with the added benefit of heated handles. This saw is engineered for rigorous tasks, featuring robust construction and advanced features like the LowVib system that effectively reduces vibrations. This model is well-suited for those who face harsh weather conditions, ensuring maximum comfort and efficiency in the field.

Collectively, these Husqvarna models represent the pinnacle of modern chainsaw technology, showcasing features that emphasize performance, user comfort, and reliability for all kinds of challenging cutting tasks. Whether you are a professional logger or a passionate homeowner, there is a Husqvarna model to meet your needs.
Top Page Image Contents