Husqvarna 562XP Tree felling technique, Limbing, Logs are lying together. Such, Or fatal injury

Page 25

WORKING TECHNIQUES

Limbing

When limbing thick branches you should use the same approach as for cutting.

Cut difficult branches piece by piece.

If it is possible (can you turn the log?) stop cutting about 2/3 of the way through the log.

Turn the log and finish the cut from the opposite side.

1

2

3

Cutting

 

!

WARNING! Never attempt to cut logs

while they are in a pile or when a couple

 

 

of logs are lying together. Such

 

procedures drastically increase the risk

 

of kickback which can result in a serious

 

or fatal injury.

If you have a pile of logs, each log you attempt to cut should be removed from the pile, placed on a saw horse or runners and cut individually.

Remove the cut pieces from the cutting area. By leaving them in the cutting area, you increase the risk for inadvertently getting a kickback, as well as increasing the risk of losing your balance while working.

The log is lying on the ground. There is little risk of the chain jamming or the object splitting. However there is a risk that the chain will touch the ground when you finish the cut.

Cut all the way through the log from above. Avoid letting the chain touch the ground as you finish the cut. Maintain full throttle but be prepared for what might happen.

The log is supported at one end. There is a high risk that it will split.

Start by cutting from below (about 1/3 of the way through).

Finish by cutting from above so that the two cuts meet.

The log is supported at both ends. There is a high risk that the chain will jam.

Start by cutting from above (about 1/3 of the way through).

Finish by cutting from below so that the two cuts meet.

Tree felling technique

IMPORTANT! It takes a lot of experience to fell a tree. Inexperienced users of chain saws should not fell trees. Do not attempt any task that you feel unsure of!

Safe distance

The safe distance between a tree that is to be felled and anyone else working nearby is at least 2 1/2 tree lengths.

English – 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents 555 556 560XP 560XPG 562XP 562XPG Symbols on the machine KEY to SymbolsSymbols in the operator’s manual Contents Dear Customer IntroductionWhat is what on the chain saw? What is WHAT?Before using a new chain saw General Safety PrecautionsAlways use common sense Machine′s safety equipmentPersonal protective equipment Chain brake and front hand guardGeneral Safety Precautions Chain catcher Throttle trigger lockoutRight hand guard Vibration damping systemCutting equipment Stop switchMuffler General rulesGuide bar Cutting equipment designed to reduce kickbackSaw chain General advice on adjusting depth gauge setting Sharpening your chain and adjusting depth gauge settingGeneral information on sharpening cutting teeth Increases the risk of kickbackAdjustment of depth gauge setting Increased if the depth gauge setting isTensioning the chain Too largeLubricating cutting equipment Checking wear on cutting equipment Needle bearing lubricationFitting the bar and chain AssemblyFitting a spike bumper Working with the chainFuel Fuel HandlingFueling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingStarting Stopping Working Techniques Basic safety rulesBefore use General working instructionsCleaning Clutch cover causing the chain toJam. Always stop the engine before Terms Basic cutting techniqueLimbing Tree felling techniqueLogs are lying together. Such Or fatal injuryClearing the trunk and preparing your retreat Felling directionDirectional cuts Felling cut What is kickback? How to avoid kickbackFreeing a tree that has fallen badly Cutting the trunk into logs Carburettor adjustment MaintenanceGeneral Checking the inertia brake release Muffler Changing a broken or worn starter cord Starter housingTensioning the recoil spring Changing a broken recoil springSpark plug Air filterFitting the starter Lubricating the bar tip sprocket Adjustment of the oil pumpNeedle bearing lubrication Cooling systemTemperature 0C or colder Air Injection centrifugal cleaningWinter use Heated handlesDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical Data560XPG 562XP 562XPG Engine Saw chain filing and file gauges Guide bar and saw chain combinationsApplies to Europe only EC Declaration of ConformityEN ISO 121002010, ISO 149822009, EN ISO Page Page Original instructions 1156729-26

560XPG, 560XP, 556, 562XPG, 562XP specifications

The Husqvarna 562XPG, 555, 560XP, 562XP, and 560XPG are part of Husqvarna’s acclaimed line of professional chainsaws known for their power, efficiency, and ergonomic design. Each model caters to the specific needs of forestry professionals, loggers, and serious outdoor enthusiasts.

Starting with the Husqvarna 562XPG, this chainsaw is designed for high-performance cutting in demanding conditions. It features a powerful and efficient X-Torq engine that delivers high torque over a wide RPM range, reducing fuel consumption and emissions. The 562XPG also includes heated handles, which provide additional comfort during cold weather operations. This model is equipped with the AutoTune technology that automatically adjusts the engine settings to varying conditions, ensuring optimal performance without the need for manual tuning.

Next in line is the Husqvarna 555, a robust chainsaw that strikes a balance between power and weight. It is also equipped with the X-Torq engine, making it both fuel-efficient and environmentally friendly. The 555 features an innovative air injection system that removes large debris particles before they enter the air filter, ensuring a longer air filter life and reliable performance. Its lightweight design and excellent balance make it easy to control, even during extended use.

The Husqvarna 560XP is another powerful option, particularly favorable for tree cutting and harvesting. It boasts a professional-grade engine with a higher RPM capacity and advanced air management, maximizing efficiency and cutting speed. Its ergonomic design incorporates features like a low-vibration system and an adjustable oil pump, which improves user comfort and allows for optimal chain lubrication.

The 562XP is similar to the 562XPG but without the heated handles, providing an excellent choice for users who prioritize performance in milder climates. Its lightweight construction coupled with a slim design enhances maneuverability, making it ideal for both professional use and meticulous backyard projects.

Lastly, the Husqvarna 560XPG combines the features of the XP models with the added benefit of heated handles. This saw is engineered for rigorous tasks, featuring robust construction and advanced features like the LowVib system that effectively reduces vibrations. This model is well-suited for those who face harsh weather conditions, ensuring maximum comfort and efficiency in the field.

Collectively, these Husqvarna models represent the pinnacle of modern chainsaw technology, showcasing features that emphasize performance, user comfort, and reliability for all kinds of challenging cutting tasks. Whether you are a professional logger or a passionate homeowner, there is a Husqvarna model to meet your needs.
Top Page Image Contents