Hustler Turf none manual Fuel system

Page 82

The Hustler FasTrak is equipped with two Hydro-Gear EZT integrated pump/motor transmissions (FIG. 5).

EZT INTEGRATED

PUMP/MOTOR

FIG. 5

The EZT integrated pump/motor transmission are sealed for life and do not require any scheduled service.

The EZT integrated pump/motor transmissions are filled with 20W50 engine oil. If they ever become low on oil, fill to the level shown in FIG. 6.

FIG. 6

Fuel system

DANGER: Observe usual fuel handling precautions:

Do not smoke while refueling. Extinguish all cigarettes, cigars, pipes and other sources of ignition.

Do not remove fuel cap or fill tank with engine running or while engine is hot. Clean up any gasoline spills.

Allow engine to cool before storing machine inside a building.

Keep fuel away from open flame or spark and store machine away from open flame or spark or pilot light such as on a water heater or other appliances.

Use extreme care when handling gasoline and other fuels. They are extremely flammable and vapors are explosive. A fire or from gasoline can burn you and others and can damage property.

Never refuel or drain the fuel from the machine indoors.

Never attempt to start engine when there is a strong odor of gasoline fumes present. Locate and correct cause.

Store gasoline in an approved container and keep it out of the reach of children. Never buy more than a 30 day supply of gasoline.

Always place gasoline containers on the ground away from your vehicle before filling.

Do not fill gasoline containers inside a vehicle or on a truck or trailer bed with interior carpets or plastic bed liners.

Always place gasoline containers on the ground away from your vehicle before filling.

When practical, remove gas-powered equipment from the truck or trailer and refuel the equipment with its wheels on the ground. If this is not possible, then refuel the equipment on the truck or trailer using a portable container an not a gasoline dispenser nozzle. If a gasoline dispenser nozzle must be used, keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

9-12

333559 09/08

Image 82
Contents Hustler FasTrak 36 & 42 Decks Parts Manual Cl-2 333559 9/08 333559 9/08 Cl-3 Cl-4 333559 9/08 Table of Contents 333559 09/08 Frequently Ordered Parts Service LiteratureGeneral Information OptionsHardware Description Codes & Abbreviations Contents Tractor Frame Rivet Nut Installation DescriptionEngine Guard and Anti-rollover Bracket Assemblies Footrest Assembly Contents Battery Installation Harness BLKDeck Lift Assembly Deck Lift LinkHydro Transmission Installation S/N Prior To Index Service MFG. Part QTY Description Hydro Transmission Installation S/N Higher Than Torque to 17 ft.-lbs Hydro transmission service parts Steering and Brake Assembly QTY Description 333559 09/08 Contents Honda 16 HP Engine Installation Honda 16HP Engine Used on 333559 09/08 This page intentionally left blank Kohler 15 & 17 HP Engine Installation Kohler 15 HP Engine SV470S 333559 09/08 This page intentionally left blank Fuel System Installation Torque to 20 ft.-lbs Service parts not shown for fuel system Instrument Panel Installation Choke Cable Kohler Honda 16HP Electrical Schematic Honda 16HP Electrical Schematic Kohler 15 & 17 HP Electrical Schematic 601127 Kohler 15 & 17 HP Electrical Schematic 601127&793117 This page intentionally left blank 333559 08/08 Front Wheel Assembly Caster ForkFront Wheel Breakdown Drive Wheel Assembly Contents Deck Assembly Discharge Chute Base Deck Pulley Assembly Idler PULLEY, 5.00OD, 5/8ID 333559 09/08 This page intentionally left blank Deck Assembly Index Service 1412 333559 09/08 793893 333559 09/08 This page intentionally left blank Blade Spindle Assembly Breakdown 333559 08/08 This page intentionally left blank Contents Deck Installation Belt Routing and Tensioning Seat Installation Contents Tractor Decals Deflector Shield Decal Deck Decals 793513 333559 Maintenance & Adjustment Safety Adjustments Maintenance & Adjustment Safety Safe Maintenance & Adjustment PracticesUsing a ramp Children Safety and Instruction Decals Part Number 794297 Maintenance ChartService AT Intervals Indicated Weekly or 50 Annually Hours References IntroductionLubrication Torque valuesTires Electrical systemMain 20 amp, blade type Clutch/Aux 10 amp, blade type Access to integrated pump/motor units Hydraulic systemFuel system Fuel Tank Engine oil and filter Draining the Fuel TanksEngine OIL Drain Plug Belt replacement Engine mounting boltsIntegrated pump/motor drive replacement Mower blade maintenance Original edge Warped Blade Replace Park Brake Adjustment AdjustmentsSteering linkage adjustment Control lever neutral adjustment Front Damper Ball Stud JAM NUT Pump ROD Adjuster Assembly Steering dampener adjustment Hydraulic pump belt adjustmentEngine RPM setting Deck drive belt adjustmentDeck leveling and height adjustment Height Stop Handle Height Adjusting Deck Lifting ARM Nuts Numerical Index Part