ASSEMBLY
18.Remove the discharge chute from the deck.
19.Place the deck plate pin in the tube on the back edge of the deck. Rotate the blower around and into place. Figure 3.
20.Install the pin thru the tabs on both the deck and the blower. Figure 3.
21.Latch the idler arm in the idler keeper. Figure 3.
22.Install the belt on the deck pulley and release the idler arm from the keeper.
23.Install the new belt shield.
24.Place the hose on the blower housing and secure with the over center hose clamp.
| DECK PLATE PIN |
ROTATE | TUBE |
| |
IDLER ARM |
|
IDLER KEEPER |
|
FIGURE 3
13