Husqvarna HCS9, HCS13 manual Troubleshooting Guide

Page 17

SERVICE AND MAINTENANCE

Troubleshooting Guide

DANGER

Before servicing unit, wait for all moving parts to come to a complete stop. Turn engine off and remove the spark plug wire.

PROBLEM

 

POSSIBLE CAUSE

 

CORRECTION

 

 

 

 

Loss of Vacuum.

1. Blower, hose or hood inlet clogged.

1.

Remove hose and clean inlet.

 

2.

Bags full.

2.

Inspect and empty.

 

3.

Fan blades bent or broken.

3.

Replace/repair impeller.

 

4. Poly mesh plugged.

4. Clean poly mesh.

Unusual vibration

1. Solid object jammed in unit.

1.

Check and remove any

or noise.

 

 

 

obstruction.

 

2.

Loose or missing bolts on unit.

2.

Tighten or replace bolts.

 

3.

Bent or damaged fan.

3.

Replace/repair impleller.

Unit difficult to close.

1.

Obstructions keeping door from

1.

Clear obstructions.

 

 

completely closing.

 

 

 

2.

Hood hinge bolts too tight.

2. Loosen bolts.

 

 

 

 

 

17

Image 17
Contents Collection System Operators Manual Husqvarna. All Rights Reserved Operators Guide IndexFeatures & Controls General Information Safety RulesOperation Unpacking Instructions AssemblyRear Guard Strap Lanyard Hitch Assembly Hitch PIN Latch Hood Assembly Hood Hinge Hood Assembly Blower/Drive Kit Assembly Deck Plate PIN Operating the Collection System OperationTransport Service and MaintenanceCaring For Hoses Troubleshooting Guide Spindle Drive Assembly Parts Illustrations Hood Assembly QTY Description Hitch Assembly Hitch Blower Assembly Floor Weldment Model HCS13 Weight KITModel HCS9 Mounting KIT Hitch BRACKET, RIGHT, W/DECAL Model HCS9 Hitch Bracket W/DECALS, Right BAG Assembly 539 111275 42 Inch Deck Drive KIT Assembly539 111276 48 Inch Deck 539 111277 52 Inch Deck 539 111278 61 Inch Deck