Husqvarna HCS9, HCS13 manual Hood Assembly Hood Hinge

Page 9

ASSEMBLY

7.Place the hood assembly on to the hitch 8. Open the hood and secure the (2) springs

assembly. Place both hood hinges between

to the bolts on the hood assembly and the

the upper hitch mounts on the hitch assembly.

hitch assembly. Figure 4.

Be sure that the rubber seal is on the inside

 

of the hood. Place the (2) friction washers

 

between the hood hinge and the upper hitch

 

mount. Place (2)990563, 3/8 x 1 bolt thru the

 

hinge and mount. Secure with (2) 976979,

 

3/8 nyloc nut. Figure 4.

 

HOOD ASSEMBLY

 

 

HOOD HINGE

 

3/8 X 1 BOLT

 

SPRING

 

3/8 NYLOC NUT

RUBBER SEAL

UPPER HITCH MOUNT

HITCH PIN

 

FIGURE 4

9

Image 9
Contents Collection System Operators Manual Husqvarna. All Rights Reserved Operators Guide IndexFeatures & Controls General Information Safety RulesOperation Unpacking Instructions AssemblyRear Guard Strap Lanyard Hitch Assembly Hitch PIN Latch Hood Assembly Hood Hinge Hood Assembly Blower/Drive Kit Assembly Deck Plate PIN Operating the Collection System OperationTransport Service and MaintenanceCaring For Hoses Troubleshooting Guide Spindle Drive Assembly Parts Illustrations Hood Assembly QTY Description Hitch Assembly Hitch Blower Assembly Floor Weldment Model HCS13 Weight KITModel HCS9 Mounting KIT Hitch BRACKET, RIGHT, W/DECAL Model HCS9 Hitch Bracket W/DECALS, Right BAG Assembly 539 111275 42 Inch Deck Drive KIT Assembly539 111276 48 Inch Deck 539 111277 52 Inch Deck 539 111278 61 Inch Deck