ASSEMBLY
4.Remove the (10) 5/16 carriage bolts that secure the standard rear guard to the straps and skid plates. Remove the standard rear guard. Replace with the collection rear guard, and secure with the carriage bolts that were just removed. Figure 2.
5.Place the hitch assembly on the ground behind the mower. Place the (2) hitch pins thru the hitch and the hitch brackets. Secure the hitch pins with the (2) hairpins that are secured with the (2) lanyards. Figure 3.
6.Move to the rear of the hitch assembly and pick it up towards the rear guard. The latch will hook over the top of the rear guard. Figure 3.
REAR GUARD | STRAP |
|
FIGURE 2
| LANYARD |
HITCH ASSEMBLY | HITCH PIN |
HITCH ASSEMBLY |
|
| LATCH |
LANYARD |
|
HITCH PIN |
|
FIGURE 3
8