Husqvarna 355FRM, 355RX, 355FXT manual Contents

CONTENTS

Contents
KEY TO SYMBOLS
Symbols	2
CONTENTS
Contents	3
Note the following before starting:	3
INTRODUCTION
Dear Customer,	4
WHAT IS WHAT?
What is what on the brush cutter?	5
What is what on the brush cutter?	6
What is what on the brush cutter?	7
GENERAL SAFETY PRECAUTIONS
Important	8
Personal protective equipment	8
Machine′s safety equipment	9
Cutting equipment	12
ASSEMBLY
Assembling the handlebar and throttle	15
Transport position, handlebar	15
Assembling the cutting equipment	15
Fitting the blade guard/combination guard, grass
blade and ball-bearing-mounted support cup	16
Fitting the blade guard and saw blade	16
Fitting the shredder blade and the shredder blade
guard (355FRM)	17
Fitting other guards and cutting attachments	18
Adjusting the harness and brush cutter	19
Triobalance harness	19
FUEL HANDLING
Fuel safety	21
Fuel	21
Fuelling	22
STARTING AND STOPPING
Check before starting	23
Starting and stopping	23
WORKING TECHNIQUES
General working instructions	25
MAINTENANCE
Carburettor	30
Muffler	31
Cooling system	31
Air filter	31
Bevel gear	32
Drive shaft	32
Spark plug	32
Winter use	33
Maintenance schedule	35
TECHNICAL DATA

Technical data	36
EC-declaration of conformity	38

Note the following before starting:

•Please read the operator’s manual carefully.

!	WARNING! Long-term exposure to noise
	can result in permanent hearing
	impairment. So always use approved
	hearing protection.
!	WARNING! Under no circumstances may
	the design of the machine be modified
	without the permission of the
	manufacturer. Always use genuine
	accessories. Non-authorized
	modifications and/or accessories can
	result in serious personal injury or the
	death of the operator or others.
!	WARNING! A clearing saw, brushcutter
	or trimmer can be dangerous if used
	incorrectly or carelessly, and can cause
	serious or fatal injury to the operator or
	others. It is extremely important that you
	read and understand the contents of this
	operator’s manual.

English – 3