Husqvarna 355RX, 355FXT, 355FRM manual General Safety Precautions, Personal protective equipment

Page 8

GENERAL SAFETY PRECAUTIONS

Important

IMPORTANT!

The machine is only designed for trimming grass, grass clearing and/or forestry clearing.

The only accessories you can operate with this engine unit are the cutting attachments we recommend in the chapter on Technical data.

Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your co-ordination.

Wear personal protective equipment. See instructions under the heading ”Personal protective equipment”.

Never use a machine that has been modified in any way from its original specification.

Never use a machine that is faulty. Carry out the checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance.

All covers, guards and handles must be fitted before starting. Ensure that the spark plug cap and ignition lead are undamaged to avoid the risk of electric shock.

The machine operator must ensure that no people or animals come closer than 15 metres while working. When several operators are working in the same area the safety distance should be at least twice the tree height and no less than 15 metres.

WARNING! This machine produces an

! electromagnetic field during operation. This field may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this machine.

WARNING! Running an engine in a

! confined or badly ventilated area can result in death due to asphyxiation or carbon monoxide poisoning.

Personal protective equipment

IMPORTANT!

A clearing saw, brushcutter or trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of this operator’s manual.

You must use approved personal protective equipment whenever you use the machine. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your dealer for help in choosing the right equipment.

WARNING! Listen out for warning signals

! or shouts when you are wearing hearing protection. Always remove your hearing protection as soon as the engine stops.

HELMET

A helmet should be worn if the trees being cleared are taller than 2 m.

HEARING PROTECTION

Wear hearing protection that provides adequate noise reduction.

EYE PROTECTION

Always wear approved eye protection. If you use a visor then you must also wear approved protective goggles. Approved protective goggles must comply with standard ANSI Z87.1 in the USA or EN 166 in EU countries.

GLOVES

Gloves should be worn when necessary, e.g., when fitting cutting attachments.

8 – English

Image 8
Contents 355FX 355FXT 355RX 355FRM KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what on the brush cutter? 355RXWhat is what on the brush cutter? 355FX, 355FXT What is what on the brush cutter? 355FRM General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutStop switch Cutting attachment guardVibration damping system Quick releaseMuffler Locking nutCutting equipment Locking screwCutting equipment General rulesSharpening grass cutters and grass blades Sharpening the saw bladeBent, twisted, cracked, broken or To straighten a twisted blade so that itTrimmer head Assembly Assembling the handlebar and throttleTransport position, handlebar Assembling the cutting equipmentFitting the blade guard and saw blade 355FX, 355FXT355RX Fitting other guards and cutting attachments Adjusting the harness and brush cutter Safety releaseAdjusting the harness Triobalance harnessCorrect balance Grass clearingFuel Fuel safetyFuel Handling Fuelling MixingStarting and Stopping Check before startingStarting and stopping Cold engineWarm engine StartingStopping Heated handlesBasic safety rules Working TechniquesGeneral working instructions ABC of clearingWorking Techniques Forestry clearing using a saw blade Grass clearing using a grass blade Brush cutting with a saw bladeGrass trimming with a trimmer head TrimmingSweeping Shredding dense vegetation with a shredder bladeCutting Maintenance CarburettorMuffler Cooling systemAir filter Is damaged it should be replacedSpark plug Bevel gearDrive shaft Winter use Temperature 0C or colderTemperature -5C or colder Maintenance Maintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataCentre hole in blades/cutters, Ø 25,4 mm EC-declaration of conformity Applies to Europe only Trimmy SII Page Auto T45, T45x T55x Original instructions 1153302-26
Related manuals
Manual 92 pages 53.47 Kb