Lincoln Electric IM511-D Hardware, To prevent Explosion when, To prevent Electrical Damage when

Page 25

Battery Charging

WARNING

GASES FROM BATTERY can explode.

• Keep sparks, flame and cigarettes away.

BATTERY ACID can burn eyes and skin.

Wear gloves and eye protection and be careful when boosting, charging or working near battery.

To prevent EXPLOSION when:

a)Installing a new battery - disconnect the negative cable from the old battery first and connect the negative cable to the new battery last.

b)Connecting a battery charger - remove the battery from the welder by disconnecting the negative cable first, then the positive cable and battery clamp. When reinstalling, connect the negative cable last.

c)Using a booster - connect the positive lead to

the battery first, then connect the negative lead to the ground lead on the base.

To prevent ELECTRICAL DAMAGE when:

a)Installing a new battery.

b)Using a booster.

Use correct polarity - Negative Ground.

To prevent BATTERY DISCHARGE, if you have an ignition switch, turn it off when engine is not running.

• To prevent BATTERY BUCKLING, tighten nuts on

battery clamp until snug.

------------------------------------------------------------------------

1.When replacing, jumping or otherwise connecting the battery to the battery cables, the proper polarity must be observed. Failure to observe the proper polarity could result in damage to the charging circuit. The positive

(+) battery cable has a red terminal cover.

2.If the battery requires charging from an external charger, disconnect the negative battery cable first and then the positive battery cable before attaching the charger leads. Failure to do so can result to damage to the internal charger components. When re-connecting the cables, connect the positive cable first and the negative cable last.

HARDWARE

Both English / Metric fasteners are used in this welder.

Engine Maintenance Parts

 

ONAN P218

KOHLER CH20S

 

 

 

Oil Filter

ONAN 122-0645

KOHLER 1205001

 

FRAM PH3614

FRAM PH3614*

 

 

 

Air Filter

ONAN 140-2628-01

KOHLER 4708303

Element

FRAM CA140PL

FRAM CA79

 

 

 

Air Filter

ONAN 140-1496

KOHLER 2408302

Pre-Cleaner

 

 

 

 

 

Fuel Filter

ONAN 149-2005

KOHLER 2505002

 

FRAM G1

FRAM G1

 

 

 

Spark Plugs

ONAN 167-0263

CHAMPION RC12YC

(Resistor

CHAMPION RS14YC

(.030” GAP)

Type)

(.025” GAP)

 

 

 

 

*Oil capacity increases from 2.0 Qts. to 2.1 Qts. when using this filter. -23 -

Image 25
Contents Ranger TM Safety Electric Shock can kill Cylinder may explode if damaged Sûreté Pour Soudage a L’Arc Précautions DE SûretéPlease Examine Carton and Equipment For Damage Immediately Thank YouTable of Contents Page General Description SpecificationsRecommended Processes and Equipment Machine K768-2 Two Wheel Undercarriage Optional FeaturesRecommended Equipment Wire FeedStick TIGSpark Arrester Installation InstructionsMachine Grounding Total Combined Length of Electrode and Work Cables PRE-OPERATION ServiceHigh Altitude Operation Angle of OperationMuffler Relocation Connection of the K449 LN-25 to the RangerRemote Output Control Connection of the LN-7 or LN-8 to the RangerConnection of the LN-742 to the Ranger High Frequency Generator for TIG welding applicationsOperating Instructions Welding Terminals Switch Remote Control SwitchIdler Switch Control AT WelderBreak-in Period Wire Feed Constant Voltage WeldingWelding Processes Stick Constant Current Welding TIG Constant Current WeldingSummary of Welding Process 115/230 Volt Dual Voltage Receptacle Auxiliary Power115V Duplex Receptacles Auxiliary Current Setting Unity Power Amperes @ Factor Standby Power ConnectionsConnection of Ranger 9 to Premises Wiring Safety Precautions MaintenanceRoutine Maintenance Overspeed is HazardousTo prevent Explosion when HardwareTo prevent Electrical Damage when Trouble Cause What to do TroubleshootingEngine Idler System Trouble Cause What to do Output System Trouble Cause What to do Output System Trouble Cause What to do Ranger 9 Onan Ranger 9 Onan CSA Version Wiring Diagram Code 10379 Ranger 9 Kohler CSA Version Wiring Diagram Code Ranger 9 / LN-25 Across the ARC Connection Diagram Warnin G Ranger 9 / K867 / LN-8 Connection Diagram To LN-25 Input Cable Plug K626-XX Input Cable Assembly Electrode Cable To Work To Control Module Dimension Print Ranger Precaucion Aviso DE

IM511-D specifications

Lincoln Electric IM511-D is an innovative multi-process welding inverter designed to meet the diverse needs of modern welding applications. Renowned for its robust build quality and advanced technologies, this machine is particularly suited for professionals who require versatility and reliability on the job site.

One of the standout features of the IM511-D is its multi-process capability. This machine allows users to switch seamlessly between MIG, TIG, and Stick welding processes, making it an ideal choice for various welding tasks. Whether engaging in fabrication, repair, or maintenance, the IM511-D stands ready to tackle a wide range of metals, including carbon steel, stainless steel, and aluminum.

At the heart of the IM511-D is its inverter technology. Inverter welders are known for their efficiency and portability, and the IM511-D is no exception. The compact design makes it easy to transport without sacrificing power or performance. This inverter technology also contributes to reduced energy consumption, making it a cost-effective solution over time.

The user-friendly interface of the IM511-D enhances usability for both seasoned welders and beginners. Equipped with an intuitive digital display, the machine allows users to monitor welding parameters in real time, facilitating precise adjustments for optimal results. This ensures a smooth operation while reducing the learning curve for new users.

Another key characteristic of the IM511-D is its advanced arc control technology. This feature ensures a stable and smooth arc, reducing spatter and improving the overall quality of the weld. The machine also includes a hot start and anti-stick function in Stick welding mode, enhancing control and preventing electrode sticking—a common issue in amateur welding practices.

Additionally, the IM511-D is designed with durability in mind. Its rugged construction can withstand the rigors of industrial environments, ensuring long-lasting performance. The machine is also equipped with built-in safety features, including thermal overload protection, which helps prevent overheating during extended use.

In summary, the Lincoln Electric IM511-D combines versatility, advanced technology, and user-friendly features, making it a premier choice for professionals in the welding industry. Its multi-process capability, inverter technology, superior arc control, and robust design position it as a reliable tool for any welding task, ensuring excellent performance and quality results every time.