Lincoln Electric IM511-D manual Ranger 9 / K867 / LN-8 Connection Diagram

Page 35

RANGER 9 / K867 / LN-8 CONNECTION DIAGRAM

WARNING

Do not operate with panels open.

Disconnect NEGATIVE (-) BATTERY LEAD before servicing.

Do not touch electrically live parts.

Keep guards in place.

Keep away from moving parts.

Only qualified personnel should install,use or service this equipment.

14PIN AMPHENOL

TO WORK

ELECTRODE

TO WORK

K867 UNIVERSAL

ADAPTER PLUG

ELECTRODE CABLE TO WIRE FEED UNIT

SPARE

 

82

 

81

N.C.

42

 

41

 

31

31

32

32

2

2

4

4

21

21

GND

GND

75 A

76 B

77 C

LN-8

WIRE

FEEDER

K196

INPUT CABLE

CAUTION :

N.D.

ANY INCREASE OF THE HIGH IDLE ENGINE RPM BY CHANGING THE GOVERNOR SETTING OR OVERRIDING THE THROTTLE LINKAGE WILL CAUSE AN INCREASE IN THE THE AC AUXILIARY VOLTAGE. IF THIS VOLTAGE GOES OVER 140 VOLTS, WIRE FEEDER CONTROL CIRCUITS MAY BE DAMAGED. THE ENGINE GOVERNOR SETTING IS PRE-SET AT THE FACTORY - DO NOT ADJUST ABOVE RPM SPECIFICATIONS LISTED IN

THE ENGINE WELDER OPERATING MANUAL.

N.A. WELDING CABLE MUST BE SIZED FOR CURRENT AND DUTY CYCLE OF APPLICATION.

N.B. USE POLARITY SWITCH TO SET FOR DESIRED ELECTRODE POLARITY. POSITION THE OUTPUT SELECTOR SWITCH TO A CV POSITION. PLACE OUTPUT CONTROL SWITCH IN "OUTPUT CONTROL REMOTE" POSITION. PLACE WELDING TERMINALS SWITCH TO "REMOTELY CONTROLLED " POSITION.

N.C. INSULATE EACH UNUSED LEAD INDIVIDUALLY. N.D. SPLICE LEADS AND INSULATE.

N.E. PLACE IDLER SWITCH IN "HIGH" IDLE POSITION.

12 - 16 - 93

M17094

RANGER 9 / LN-742 CONNECTION DIAGRAM

WARNING

Do not operate with panels open.

Disconnect NEGATIVE (-) BATTERY LEAD before servicing.

Do not touch electrically live parts.

Keep guards in place.

Keep away from moving parts.

Only qualified personnel should install,use or service this equipment.

14 PIN AMPHENOL

TO WORK

ELECTRODE

TO LN-742 INPUT

CABLE PLUG

K592 CONTROL CABLE

ELECTRODE CABLE TO WIRE FEED UNIT

CAUTION :

TO WORK

ANY INCREASE OF THE HIGH IDLE ENGINE RPM BY CHANGING THE GOVERNOR SETTING OR OVERRIDING THE THROTTLE LINKAGE WILL CAUSE AN INCREASE IN THE THE AC AUXILIARY VOLTAGE. IF THIS VOLTAGE GOES OVER 140 VOLTS, WIRE FEEDER CONTROL CIRCUITS MAY BE DAMAGED. THE ENGINE GOVERNOR SETTING IS PRE-SET AT THE FACTORY - DO NOT ADJUST ABOVE RPM SPECIFICATIONS LISTED IN

THE ENGINE WELDER OPERATING MANUAL.

N.A. USE POLARITY SWITCH TO SET FOR DESIRED ELECTRODE POLARITY. POSITION THE OUTPUT SELECTOR SWITCH TO A CV POSITION. PLACE WELDER TERMINALS SWITCH TO "REMOTELY CONTROLLED" POSITION.

N.B. WELDING CABLES MUST BE OF PROPER CAPACITY FOR THE CURRENT AND DUTY CYCLE OF IMMEDIATE AND FUTURE APPLICATIONS. SEE OPERATING MANUAL.

N.C. IF OPTIONAL REMOTE OUTPUT CONTROL IS USED, PLACE OUTPUT CONTROL SWITCH IN "OUTPUT CONTROL REMOTE" POSITIION. N.D. PLACE IDLER SWITCH IN "AUTO" OR "HIGH" IDLE POSITION AS DESIRED.

12 - 16 - 93

M17100

– 33 –

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Ranger TM Safety Electric Shock can kill Cylinder may explode if damaged Sûreté Pour Soudage a L’Arc Précautions DE SûretéPlease Examine Carton and Equipment For Damage Immediately Thank YouTable of Contents Page Recommended Processes and Equipment SpecificationsGeneral Description Machine K768-2 Two Wheel Undercarriage Optional FeaturesTIG Wire FeedRecommended Equipment StickMachine Grounding Installation InstructionsSpark Arrester Total Combined Length of Electrode and Work Cables PRE-OPERATION ServiceConnection of the K449 LN-25 to the Ranger Angle of OperationHigh Altitude Operation Muffler RelocationHigh Frequency Generator for TIG welding applications Connection of the LN-7 or LN-8 to the RangerRemote Output Control Connection of the LN-742 to the RangerOperating Instructions Control AT Welder Remote Control SwitchWelding Terminals Switch Idler SwitchTIG Constant Current Welding Wire Feed Constant Voltage WeldingBreak-in Period Welding Processes Stick Constant Current WeldingSummary of Welding Process 115V Duplex Receptacles Auxiliary Power115/230 Volt Dual Voltage Receptacle Auxiliary Current Setting Unity Power Amperes @ Factor Standby Power ConnectionsConnection of Ranger 9 to Premises Wiring Overspeed is Hazardous MaintenanceSafety Precautions Routine MaintenanceTo prevent Electrical Damage when HardwareTo prevent Explosion when Engine TroubleshootingTrouble Cause What to do Idler System Trouble Cause What to do Output System Trouble Cause What to do Output System Trouble Cause What to do Ranger 9 Onan Ranger 9 Onan CSA Version Wiring Diagram Code 10379 Ranger 9 Kohler CSA Version Wiring Diagram Code Ranger 9 / LN-25 Across the ARC Connection Diagram Warnin G Ranger 9 / K867 / LN-8 Connection Diagram To LN-25 Input Cable Plug K626-XX Input Cable Assembly Electrode Cable To Work To Control Module Dimension Print Ranger Precaucion Aviso DE

IM511-D specifications

Lincoln Electric IM511-D is an innovative multi-process welding inverter designed to meet the diverse needs of modern welding applications. Renowned for its robust build quality and advanced technologies, this machine is particularly suited for professionals who require versatility and reliability on the job site.

One of the standout features of the IM511-D is its multi-process capability. This machine allows users to switch seamlessly between MIG, TIG, and Stick welding processes, making it an ideal choice for various welding tasks. Whether engaging in fabrication, repair, or maintenance, the IM511-D stands ready to tackle a wide range of metals, including carbon steel, stainless steel, and aluminum.

At the heart of the IM511-D is its inverter technology. Inverter welders are known for their efficiency and portability, and the IM511-D is no exception. The compact design makes it easy to transport without sacrificing power or performance. This inverter technology also contributes to reduced energy consumption, making it a cost-effective solution over time.

The user-friendly interface of the IM511-D enhances usability for both seasoned welders and beginners. Equipped with an intuitive digital display, the machine allows users to monitor welding parameters in real time, facilitating precise adjustments for optimal results. This ensures a smooth operation while reducing the learning curve for new users.

Another key characteristic of the IM511-D is its advanced arc control technology. This feature ensures a stable and smooth arc, reducing spatter and improving the overall quality of the weld. The machine also includes a hot start and anti-stick function in Stick welding mode, enhancing control and preventing electrode sticking—a common issue in amateur welding practices.

Additionally, the IM511-D is designed with durability in mind. Its rugged construction can withstand the rigors of industrial environments, ensuring long-lasting performance. The machine is also equipped with built-in safety features, including thermal overload protection, which helps prevent overheating during extended use.

In summary, the Lincoln Electric IM511-D combines versatility, advanced technology, and user-friendly features, making it a premier choice for professionals in the welding industry. Its multi-process capability, inverter technology, superior arc control, and robust design position it as a reliable tool for any welding task, ensuring excellent performance and quality results every time.
Top Page Image Contents