Lincoln Electric IM511-D manual Electrode Cable To Work To Control Module

Page 37

RANGER 9 AND 10LX / K691-10 / K488 / K487 SPOOL GUN CONNECTION DIAGRAM

WARNING

Do not operate with panels open.

Keep guards in place.

Disconnect NEGATIVE (-) BATTERY LEAD

Keep away from moving parts.

before servicing.

Only qualified personnel should install,use

Do not touch electrically live parts.

or service this equipment.

115V RECEPTACLE

 

RANGER

 

 

14 PIN WIRE FEEDER

6 PIN REMOTE

RECEPTACLE

 

 

 

RECEPTACLE

TO WORK

ELECTRODE

 

K488 SG

CONTROL MODULE

K691-10

INPUT CABLE

K487-25

SPOOL GUN

ELECTRODE CABLE

TO WORK

TO CONTROL MODULE

CAUTION : BE SURE THAT CONTROL MODULE MODE SLIDE SWITCH IS IN THE "LINCOLN" (CONTACT CLOSURE) POSITION BEFORE ATTEMPTING TO OPERATE CONTROL MODULE. INCORRECT SWITCH POSITION COULD RESULT IN DAMAGE TO THE CONTROL MODULE AND/OR POWER SOURCE.

ANY INCREASE OF THE HIGH IDLE ENGINE RPM BY CHANGING THE GOVERNOR SETTING OR OVERRIDING THE THROTTLE LINKAGE WILL CAUSE AN INCREASE IN THE THE AC AUXILIARY VOLTAGE. IF THIS VOLTAGE GOES OVER 140 VOLTS, WIRE FEEDER CONTROL CIRCUITS MAY BE DAMAGED. THE ENGINE GOVERNOR SETTING IS PRE-SET AT THE FACTORY - DO NOT ADJUST ABOVE RPM SPECIFICATIONS LISTED IN

THE ENGINE WELDER OPERATING MANUAL.

N.A. WELDING CABLE MUST BE SIZED FOR CURRENT AND DUTY CYCLE OF APPLICATION.

N.B. USE POLARITY SWITCH TO SET FOR DESIRED ELECTRODE POLARITY. POSITION THE OUTPUT SELECTOR SWITCH TO A CV POSITION. PLACE WELDING TERMINALS SWITCH TO "REMOTELY CONTROLLED" POSITION.

N.C. IF OPTIONAL K857 REMOTE OUTPUT CONTROL IS CONNECTED TO 6 PIN RECEPTACLE,PLACE OUTPUT CONTROL SWITCH IN "OUTPUT CONTROL REMOTE" POSITION.

N.D. PLACE IDLER SWITCH IN "HIGH" IDLE POSITION.

CRM23615

M17902

– 35 –

MAR 95

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Ranger TM Safety Electric Shock can kill Cylinder may explode if damaged Sûreté Pour Soudage a L’Arc Précautions DE SûretéPlease Examine Carton and Equipment For Damage Immediately Thank YouTable of Contents Page General Description SpecificationsRecommended Processes and Equipment Machine K768-2 Two Wheel Undercarriage Optional FeaturesRecommended Equipment Wire FeedStick TIGSpark Arrester Installation InstructionsMachine Grounding Total Combined Length of Electrode and Work Cables PRE-OPERATION ServiceHigh Altitude Operation Angle of OperationMuffler Relocation Connection of the K449 LN-25 to the RangerRemote Output Control Connection of the LN-7 or LN-8 to the RangerConnection of the LN-742 to the Ranger High Frequency Generator for TIG welding applicationsOperating Instructions Welding Terminals Switch Remote Control SwitchIdler Switch Control AT WelderBreak-in Period Wire Feed Constant Voltage WeldingWelding Processes Stick Constant Current Welding TIG Constant Current WeldingSummary of Welding Process 115/230 Volt Dual Voltage Receptacle Auxiliary Power115V Duplex Receptacles Auxiliary Current Setting Unity Power Amperes @ Factor Standby Power ConnectionsConnection of Ranger 9 to Premises Wiring Safety Precautions MaintenanceRoutine Maintenance Overspeed is HazardousTo prevent Explosion when HardwareTo prevent Electrical Damage when Trouble Cause What to do TroubleshootingEngine Idler System Trouble Cause What to do Output System Trouble Cause What to do Output System Trouble Cause What to do Ranger 9 Onan Ranger 9 Onan CSA Version Wiring Diagram Code 10379 Ranger 9 Kohler CSA Version Wiring Diagram Code Ranger 9 / LN-25 Across the ARC Connection Diagram Warnin G Ranger 9 / K867 / LN-8 Connection Diagram To LN-25 Input Cable Plug K626-XX Input Cable Assembly Electrode Cable To Work To Control Module Dimension Print Ranger Precaucion Aviso DE

IM511-D specifications

Lincoln Electric IM511-D is an innovative multi-process welding inverter designed to meet the diverse needs of modern welding applications. Renowned for its robust build quality and advanced technologies, this machine is particularly suited for professionals who require versatility and reliability on the job site.

One of the standout features of the IM511-D is its multi-process capability. This machine allows users to switch seamlessly between MIG, TIG, and Stick welding processes, making it an ideal choice for various welding tasks. Whether engaging in fabrication, repair, or maintenance, the IM511-D stands ready to tackle a wide range of metals, including carbon steel, stainless steel, and aluminum.

At the heart of the IM511-D is its inverter technology. Inverter welders are known for their efficiency and portability, and the IM511-D is no exception. The compact design makes it easy to transport without sacrificing power or performance. This inverter technology also contributes to reduced energy consumption, making it a cost-effective solution over time.

The user-friendly interface of the IM511-D enhances usability for both seasoned welders and beginners. Equipped with an intuitive digital display, the machine allows users to monitor welding parameters in real time, facilitating precise adjustments for optimal results. This ensures a smooth operation while reducing the learning curve for new users.

Another key characteristic of the IM511-D is its advanced arc control technology. This feature ensures a stable and smooth arc, reducing spatter and improving the overall quality of the weld. The machine also includes a hot start and anti-stick function in Stick welding mode, enhancing control and preventing electrode sticking—a common issue in amateur welding practices.

Additionally, the IM511-D is designed with durability in mind. Its rugged construction can withstand the rigors of industrial environments, ensuring long-lasting performance. The machine is also equipped with built-in safety features, including thermal overload protection, which helps prevent overheating during extended use.

In summary, the Lincoln Electric IM511-D combines versatility, advanced technology, and user-friendly features, making it a premier choice for professionals in the welding industry. Its multi-process capability, inverter technology, superior arc control, and robust design position it as a reliable tool for any welding task, ensuring excellent performance and quality results every time.
Top Page Image Contents