Panasonic M282737F Attach remote switch, Power cord may remain connected to the battery

Page 15

 

 

 

Assembly (continued)

 

 

 

 

 

5. Connect power cord

Connect the sprayer’s battery power cord to the vehicle battery using the

 

to battery

following procedure:

 

 

a) Disconnect the vehicle battery ground wire.

 

 

b) Connect the remote switch’s red battery clamp or red wire connector to the

 

 

 

positive (+) terminal of the battery.

 

 

c)

Connect the remote switch’s black battery clamp or black wire connector to

 

 

 

the negative (-)terminal of the battery.

 

 

d)

Reconnect the vehicle battery ground wire.

WARNING: Always connect in this sequence to avoid possible shock.

6. Verify connection

Verify a complete connection has been made by checking with a DC voltmeter,

 

or

briefly connecting to the pump power cord and listening for pump activation.

7. Connect all three

Connect the three sprayer power cords together.

power cord together

a)

Check to be sure the power switch is in the “OFF” position on the remote

 

 

switch power cord.

 

b)

Connect the one end of the remote switch power cord to the battery power

 

 

cord and the other end to the pump power cord.

To Battery

Battery power cord

 

 

Remote switch

 

 

power cord

 

 

Pump power cord

01981

8. Attach remote switch

Using supplied velcro pads, affix remote switch to vehicle in a position that is

to vehicle

easily reached from the driver’s seat.

 

9. Disconnect after use

AFTER EACH USE, disconnect power to the sprayer by disconnecting the

 

sprayer’s remote switch power cord from the battery power cord – the battery

 

power cord may remain connected to the battery.

 

NOTE: It is important to disconnect power to the sprayer when not in use for

 

safety reasons. ALWAYS verify that the power has been disconnected or the

 

remote switch is in the OFF position before adding chemicals or servicing.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents M282737F Hazard Signal Word Definitions Table of Contents Spraying Pesticides Intended UseChemical Application Safety Summary of Important Safety InformationDuring Assembly General Chemical SafetyInhalation Chemical accident proceduresDifferently with filled sprayer attached Unpacking Closely inspect all contents in the shipping cartonFollowing items are found in the manual bag Unpacking the Manual BagStep Three Attach the cart base to the sprayer AssemblyStep One Attach the tongue to the cart base Step Two Attach the hitch mount to the tongueStep Four Attach wheels to cart base Step Five Attach pressure gaugeStep Six Attach gun hose to spray gun and pump Step Seven Attach gun clips to tank Step Eight Attach drain cap to tankStep Nine Attach hose guide to tank Step Eleven Connect power cords to vehicle battery Preparatory safety Preparatory safety stepsStep Ten Attach sprayer to vehicle To install battery clamps Separate powerPrepare wire ends Vehicle batteryPower cord may remain connected to the battery Attach remote switchTest the system for leaks with water Step Twelve Check and test completed assemblyCheck and test completed assembly Test with waterMachine Components General Chemical Safety Operation Important Safety InformationAfter Spraying Chemical Application SafetyBefore Spraying During SprayingTowing Safety Inhalation Important safety rules Operation Preparing the Sprayer for Each UseInspect Inspect and test the sprayer thoroughly Repair Operation Using the Sprayer Step One Assess wind conditions and clear work areaSpray because the wind is too strong Ensure tank is flushed of all chemicals from prior uses Step Two Fill the sprayerFill tank Check drainThrough priming Hose Review safetyStep Three Operate the sprayer Ensure flowOperate spray gun as needed for application Proper Operation of the Spray GunImmediately Open until desired amount of agitation is achievedLaunder Step Four Clean sprayer and decontaminate after useDrain tank DecontaminateStorage Before attempting to service the sprayer TroubleshootingAny Questions, Comments, Problems or Parts Orders SpecificationsExploded View 282737 Rev. F Any Questions, Comments, Problems or Parts Orders

M282737F specifications

Panasonic has long been a key player in the electronics industry, providing innovative products that meet diverse consumer needs. One of their notable offerings is the Panasonic M282737F, a versatile and efficient device that showcases the company's commitment to quality and advanced technology.

The M282737F is designed primarily for industrial applications, catering to sectors that require reliable and high-performance solutions. Its standout feature is its robust construction, which ensures durability in demanding environments. This makes it an ideal choice for factories, warehouses, and other industrial settings where equipment faces wear and tear.

At the heart of the M282737F is Panasonic's cutting-edge technology, which includes enhanced energy efficiency capabilities. This device is engineered to minimize power consumption while maintaining optimal performance, thus reducing operational costs for businesses. These efficiency measures align with global efforts toward sustainability, making the M282737F a responsible choice for environmentally conscious companies.

In terms of usability, the M282737F offers intuitive controls and a user-friendly interface, allowing operators to seamlessly integrate it into their existing workflows. Its compatibility with various systems and platforms further enhances its versatility, ensuring that it can function effectively within diverse operational contexts. This interoperability means that users can leverage nostalgic legacy systems while also preparing for future advancements.

Additionally, safety features are paramount in the design of the M282737F. It is equipped with multiple safeguards that protect against overload and short circuits, ensuring a high level of reliability in critical applications. These built-in safety mechanisms also provide peace of mind to operators who depend on the device for their daily operations.

Another noteworthy characteristic of the M282737F is its compact and lightweight design. This factor not only makes it easier to install but also allows for flexibility in deployment, particularly in spaces where every square inch is valuable.

In summary, the Panasonic M282737F stands out as a prime example of the company's dedication to engineering excellence, energy efficiency, and user-friendly design. With its robust features, advanced technologies, and safety mechanisms, it is a worthy investment for any industrial operation looking to enhance productivity and reliability in their equipment.
Top Page Image Contents