Powermate P-WFT-16022 specifications How to Replace the Drive Belt

Page 18

Maintenance (Continued)

• Save all instructions

How to Replace the Drive Belt

WARNING

Before you remove the drive belt, disconnect the wire from the spark plug.

1.Remove the two fasteners that hold the rear of the shield to the trimmer housing. (See Figure 19)

2.Remove the four fasteners that hold the front of the shield and trimmer head to the trimmer housing.

3.Remove the shield and the trimmer head. (See Figure 19).

4.Remove the “V” Pulley from the idler bracket. (See Figure 20)

5.Raise the front of the trimmer housing and remove the drive belt. Do not bend the belt guides. (See Figure 20)

IMPORTANT: Only use a replacement belt from the manufac- turer. To order spare parts call us at 1-800-737-2112

6.To assemble the drive belt, reverse the above steps.

7.The torque specs are

•22-40 foot-pounds [30-55 Nm] for the shield fasteners,

•27-33 foot-pounds [36.6-44.7 Nm] for the drive pulley mounting bolt, and

•18-25 foot-pounds [24.4-34 Nm] for the trimmer head bolts.

8.Check the routing of the drive belt. Make sure the drive belt is inside of all belt guides and that the belt is not twisted. (See Figure 20)

IMPORTANT: Test the drive system. Start the engine and move the throttle control to the FAST position. Engage and disengage the trimmer head several times. When disen- gaged, make sure the trimmer head completely stops when resting on the ground. If the trimmer head continues to rotate, take the trimmer to an authorized Service Center.

Trimmer Housing

Drive Belt

Shield

Trimmer Head

Figure 19

Drive Belt

“V” Pulley

 

 

Belt Guide

Belt Guide

Belt Guide

Mounting Bolt

Drive Pulley

NOTE: View is bottom of the unit

Figure 20

Questions? Call Toll Free at 1-800-737-2112

17

Copyright © 2009 MAT Engine Technologies, LLC

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Field Trimmer Operator’s ManualSafety Warning Symbols Safety DefinitionsSafety Alert Symbols Control and Operating SymbolsImportant Safety Information Save all instructionsFuel Safety Storage Safety Specifications FeaturesSave all instructions Unit Engine Assembly How to Assemble the HandleEngine Preparation How to Check Oil Level and Fill to Proper LevelAmbient Service Temperature Engine OilHow to Fill Engine with Fuel FuelHow to Start the Engine OperationHow to Disengage the Trimmer Head How to Stop the EngineHow to Engage the Trimmer Head Operation Save all instructionsHow to Adjust the Height of Cut Trimming TipsSlope Guide Maintenance Service RecordsService How to Change the Oil How to Clean the Air FilterHow to Replace the Trimmer Lines How to Check the Spark Plug How to Replace the Drive Belt Technical Service How to Prepare for StorageMetl Corporate Office Correspondence only Troubleshooting Problem Possible Causes SolutionsWarranty Powermate Field Trimmer Limited WarrantyEmisson Control System Warranty Your Warranty Rights and ObligationsManufacturer’s Warranty Coverage Exclusions WarrantyHow to Obtain Warranty Service Limitations of LiabilitySystems Covered by this Warranty Parts Description Manual del usuario Llame sin costo alSímbolos de alerta para sequradad Símbolos de advertencia para seguridadSímbolos de control y funcionamiento Instrucciones de seguridad importantes Conserve todas las instruccionesInstrucciones de seguridad importantes la siguiente Seguridad DE Niños Conserve todas las instrucciones Unidad EspecificacionesCaracterísticas Cubierta del arrancador de retroceso Cubre el meMontaje Cómo montar el asideroPreparción del motor Aceite de motorPreparción del motor la siguiente CombustibleUso Antes de arrancar el motorCómo arrancar el motor Cómo engranar el cabezal de la segadora Uso la siguiente Conserve todas las instruccionesCómo parar el motor Cómo desengranar el cabezal de la segadoraUso la siguiente Guía Para Pendientes Mantenimiento Notas Importantes sobre el programa de mantenimientoMantenimiento la siguiente Cómo cambiar el aceiteCómo limpiar filtro de aire Cómo cambiar los hilos de la segadora Cómo revisar la bujía Modelo de bujía Torch F6RTCCómo cambiar la banda del impulsor Servicio técnico Cómo preparala para almacenamientoWildlife Way Long Grove, IL Diagnóstico y resolución de problemas Conserve todas las instrucciones ProblemaGarantía Garantía limitada de la Segadora Souhland Para Campo AbiertoDerechos y obligaciones al amparo de la garantía Garantía la siguiente Conserve todas las instruccionesGarantía del sistema pro control de emisiones contaminantes Cobertura de la garantía del fabricanteExclusiones Cobertura de la garantíaCómo obtener servicio de garantía Limitación de responsabilidadGarantía la siguiente Powermate Field Trimmer California Air Resource BoardPara Cambiar EL Filtro DE Aire

P-WFT-16022 specifications

The Powermate P-WFT-16022 is a versatile and robust workbench tool designed to elevate the efficiency and convenience of various tasks around the workshop or home. This powerful workbench offers an array of features that cater to both professionals and DIY enthusiasts, making it an essential addition to any workspace.

One of the standout features of the Powermate P-WFT-16022 is its durable construction. Made from high-quality materials, the workbench is designed to withstand heavy use and resist wear and tear over time. The surface is engineered to be scratch-resistant, ensuring that it maintains its appearance and functionality even after extensive handling.

In terms of dimensions, the Powermate P-WFT-16022 provides a generous workspace, allowing users to work on multiple projects simultaneously. Its ample surface area is designed to accommodate a variety of tools and materials, making it ideal for woodworking, metalworking, and other crafting activities. The sturdy legs offer stability and support, ensuring that the workbench remains firmly in place during operation.

One of the technological highlights of the Powermate P-WFT-16022 is its integrated power strip. This feature comes equipped with multiple outlets, allowing users to plug in various tools and appliances without the need for additional extension cords. This not only enhances convenience but also ensures that everything needed for a project is within easy reach.

The P-WFT-16022 also incorporates adjustable height settings, making it customizable to suit the user's preferences or specific tasks. This ergonomic feature can help reduce strain and fatigue during prolonged use, contributing to a more comfortable working environment.

Another noteworthy characteristic of this workbench tool is its portability. The built-in wheels allow users to move the workbench effortlessly from one location to another. This ease of mobility makes it suitable for both workshop settings and on-site jobs, providing flexibility for various tasks.

Overall, the Powermate P-WFT-16022 is an exemplary workbench tool that combines sturdiness, functionality, and advanced features. Its practical design caters to a wide range of applications, ensuring users can tackle projects with confidence and efficiency. Whether for professional use or personal projects, this workbench is a reliable companion that meets the demands of any crafting or repair task.
Top Page Image Contents