Emisson Control System Warranty | Powermate P-WFT-16022 specification

Warranty

• Save all instructions

B Emisson Control System Warranty

This MAT Engine Technologies, LLC (METL) outdoor power equipment engine complies with the emissions regulations of:

Powermate® Model No.	Regulatory Agency

P-WFT-16022-[E]	United States Environmental Protection Agency (“U.S. EPA”)
P-WFT-16022	United States Environmental Protection Agency (“U.S. EPA”) and State of California

To the extent there is any conflict between this Emissions Control System Warranty and the equipment manufacturer’s warranty, this Emissions Control System Warranty shall apply except where the equipment manufacturer’s warranty may provide a longer warranty period. Please read your warranty rights and obligations carefully. Some sections of the warranty may not apply to the specific equipment model you purchased. Unless specifically noted otherwise, the terms of the Emission Control System Warranty shall apply to all product engines covered within this manual.

Your Warranty Rights and Obligations:

The California Air Resources Board, U.S. EPA and MAT Engine Technologies, LLC (METL) are pleased to explain the Emission Control Sys- tem Warranty on your new outdoor power equipment engine.

California (applies only to Model No. P-WFT-16022)

In California, new spark-ignited small off-road equipment engines must be designed, built and equipped to meet the State’s stringent anti-smog standards.

Other States, U.S. Territories

In other areas of the United States, your engine must be designed, built and equipped to meet the U.S. EPA emission standards for spark- ignited engines at or below 19 kilowatts.

All of the United States

MAT Engine Technologies, LLC (METL) must warrant the emissions control system on your power equipment engine for the periods of time listed below provided there has been no abuse, neglect or improper maintenance of your power equipment engine. Where a warrantable condition exists, METL will repair your power equipment engine at no cost to you including diagnosis, parts and labor.

Manufacturer’s Warranty Coverage:

The emissions control system is warranted for two years. If any emissions-related part on your engine is defective, the part will be repaired or replaced by METL.

Owner’s Warranty Responsibility

As the power equipment engine owner, you are responsible for the performance of the required maintenance listed in your owner’s manual. METL recommends that you retain all receipts covering maintenance on your power equipment engine, but METL can not deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance.

As the power equipment engine owner, you should however be aware that METL may deny your warranty coverage if your power equip- ment engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

You are responsible for presenting your power equipment engine to a distribution center or service center authorized by METL as soon as the problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities, you should contact

MAT Engine Technologies, Inc.

6700 Wildlife Way

Long Grove, IL 60047

Tel: 1-800-737-2112

Questions? Call Toll Free at 1-800-737-2112

P-WFT-16022 specifications

The Powermate P-WFT-16022 is a versatile and robust workbench tool designed to elevate the efficiency and convenience of various tasks around the workshop or home. This powerful workbench offers an array of features that cater to both professionals and DIY enthusiasts, making it an essential addition to any workspace.

One of the standout features of the Powermate P-WFT-16022 is its durable construction. Made from high-quality materials, the workbench is designed to withstand heavy use and resist wear and tear over time. The surface is engineered to be scratch-resistant, ensuring that it maintains its appearance and functionality even after extensive handling.

In terms of dimensions, the Powermate P-WFT-16022 provides a generous workspace, allowing users to work on multiple projects simultaneously. Its ample surface area is designed to accommodate a variety of tools and materials, making it ideal for woodworking, metalworking, and other crafting activities. The sturdy legs offer stability and support, ensuring that the workbench remains firmly in place during operation.

One of the technological highlights of the Powermate P-WFT-16022 is its integrated power strip. This feature comes equipped with multiple outlets, allowing users to plug in various tools and appliances without the need for additional extension cords. This not only enhances convenience but also ensures that everything needed for a project is within easy reach.

The P-WFT-16022 also incorporates adjustable height settings, making it customizable to suit the user's preferences or specific tasks. This ergonomic feature can help reduce strain and fatigue during prolonged use, contributing to a more comfortable working environment.

Another noteworthy characteristic of this workbench tool is its portability. The built-in wheels allow users to move the workbench effortlessly from one location to another. This ease of mobility makes it suitable for both workshop settings and on-site jobs, providing flexibility for various tasks.

Overall, the Powermate P-WFT-16022 is an exemplary workbench tool that combines sturdiness, functionality, and advanced features. Its practical design caters to a wide range of applications, ensuring users can tackle projects with confidence and efficiency. Whether for professional use or personal projects, this workbench is a reliable companion that meets the demands of any crafting or repair task.