Powermate P-WFT-16022 specifications How to Fill Engine with Fuel

Page 9

Engine Preparation (Continued)

• Save all instructions

B Fuel

WARNING

 

 

• Gasoline is extremely flammable and vapors can

Fuel Tank Cap

 

explode if ignited. Handle with care.

 

Use fresh, clean, regular-unleaded gasoline with a minimum of 88 Octane.

Do NOT use leaded gasoline, gasohol, methanol, or diesel fuel. Do NOT mix oil with gasoline. Do NOT allow gasoline to become contaminated with dust, water, or debris.

CAUTION

Using incorrect fuel type or contaminated fuel will cause serious engine damage.

NOTE: Fuel tank capacity is approximately 0.95 qt (0.9L)

How to Fill Engine with Fuel

WARNING

Oil Fill Cap/Dipstick

Figure 5

•Turn engine off and let engine cool for several minutes before removing the fuel cap or adding fuel.

•Never fill fuel tank indoors.

•Do not smoke while adding fuel.

1.Clean surface around fuel tank cap to prevent contaminations. Refer to Figure 5 for location of fuel cap.

2.Loosen fuel cap slowly to remove.

3.Pour fuel into the tank. Use care to avoid spillage.

WARNING

Do NOT OVERFILL fuel. Allow space for the fuel to expand due to heat from engine and/or sun.

4.Before replacing the fuel cap, inspect and clean the fuel cap seal.

5.Replace the fuel cap and securely hand-tighten. On model S-WFT-16022 only, you will feel and hear a click when the cap is secure.

6.Clean up any spilled fuel.

Questions? Call Toll Free at 1-800-737-2112

8

Copyright © 2009 MAT Engine Technologies, LLC

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operator’s Manual Field TrimmerSafety Alert Symbols Safety DefinitionsSafety Warning Symbols Control and Operating SymbolsSave all instructions Important Safety InformationFuel Safety Storage Safety Specifications FeaturesSave all instructions Unit Engine How to Assemble the Handle AssemblyAmbient Service Temperature How to Check Oil Level and Fill to Proper LevelEngine Preparation Engine OilFuel How to Fill Engine with FuelOperation How to Start the EngineHow to Engage the Trimmer Head How to Stop the EngineHow to Disengage the Trimmer Head Operation Save all instructionsTrimming Tips How to Adjust the Height of CutSlope Guide Maintenance Service RecordsService How to Clean the Air Filter How to Change the OilHow to Replace the Trimmer Lines How to Check the Spark Plug How to Replace the Drive Belt Technical Service How to Prepare for StorageMetl Corporate Office Correspondence only Problem Possible Causes Solutions TroubleshootingPowermate Field Trimmer Limited Warranty WarrantyEmisson Control System Warranty Your Warranty Rights and ObligationsManufacturer’s Warranty Coverage How to Obtain Warranty Service WarrantyExclusions Limitations of LiabilitySystems Covered by this Warranty Parts Description Llame sin costo al Manual del usuarioSímbolos de alerta para sequradad Símbolos de advertencia para seguridadSímbolos de control y funcionamiento Conserve todas las instrucciones Instrucciones de seguridad importantesInstrucciones de seguridad importantes la siguiente Seguridad DE Niños Características EspecificacionesConserve todas las instrucciones Unidad Cubierta del arrancador de retroceso Cubre el meCómo montar el asidero MontajeAceite de motor Preparción del motorCombustible Preparción del motor la siguienteUso Antes de arrancar el motorCómo arrancar el motor Cómo parar el motor Uso la siguiente Conserve todas las instruccionesCómo engranar el cabezal de la segadora Cómo desengranar el cabezal de la segadoraUso la siguiente Guía Para Pendientes Notas Importantes sobre el programa de mantenimiento MantenimientoMantenimiento la siguiente Cómo cambiar el aceiteCómo limpiar filtro de aire Cómo cambiar los hilos de la segadora Modelo de bujía Torch F6RTC Cómo revisar la bujíaCómo cambiar la banda del impulsor Servicio técnico Cómo preparala para almacenamientoWildlife Way Long Grove, IL Conserve todas las instrucciones Problema Diagnóstico y resolución de problemasGarantía limitada de la Segadora Souhland Para Campo Abierto GarantíaGarantía del sistema pro control de emisiones contaminantes Garantía la siguiente Conserve todas las instruccionesDerechos y obligaciones al amparo de la garantía Cobertura de la garantía del fabricanteCómo obtener servicio de garantía Cobertura de la garantíaExclusiones Limitación de responsabilidadGarantía la siguiente California Air Resource Board Powermate Field TrimmerPara Cambiar EL Filtro DE Aire

P-WFT-16022 specifications

The Powermate P-WFT-16022 is a versatile and robust workbench tool designed to elevate the efficiency and convenience of various tasks around the workshop or home. This powerful workbench offers an array of features that cater to both professionals and DIY enthusiasts, making it an essential addition to any workspace.

One of the standout features of the Powermate P-WFT-16022 is its durable construction. Made from high-quality materials, the workbench is designed to withstand heavy use and resist wear and tear over time. The surface is engineered to be scratch-resistant, ensuring that it maintains its appearance and functionality even after extensive handling.

In terms of dimensions, the Powermate P-WFT-16022 provides a generous workspace, allowing users to work on multiple projects simultaneously. Its ample surface area is designed to accommodate a variety of tools and materials, making it ideal for woodworking, metalworking, and other crafting activities. The sturdy legs offer stability and support, ensuring that the workbench remains firmly in place during operation.

One of the technological highlights of the Powermate P-WFT-16022 is its integrated power strip. This feature comes equipped with multiple outlets, allowing users to plug in various tools and appliances without the need for additional extension cords. This not only enhances convenience but also ensures that everything needed for a project is within easy reach.

The P-WFT-16022 also incorporates adjustable height settings, making it customizable to suit the user's preferences or specific tasks. This ergonomic feature can help reduce strain and fatigue during prolonged use, contributing to a more comfortable working environment.

Another noteworthy characteristic of this workbench tool is its portability. The built-in wheels allow users to move the workbench effortlessly from one location to another. This ease of mobility makes it suitable for both workshop settings and on-site jobs, providing flexibility for various tasks.

Overall, the Powermate P-WFT-16022 is an exemplary workbench tool that combines sturdiness, functionality, and advanced features. Its practical design caters to a wide range of applications, ensuring users can tackle projects with confidence and efficiency. Whether for professional use or personal projects, this workbench is a reliable companion that meets the demands of any crafting or repair task.
Top Page Image Contents