Powermate P-WFT-16022 specifications Operation Save all instructions, How to Stop the Engine

Page 11

Operation (Continued)

• Save all instructions

4.Firmly grip the Trimmer handle with your left hand, (See figure 8)

5.Firmly grip the Recoil Starter Handle with your right hand.

(See Figure 8)

6.Pull the recoil starter slowly, until you feel tension in the starter rope. Then quickly pull the recoil starter handle to completely unwind the starter rope. DO NOT allow the starter rope to snap back. Let the starter rope slowly re wind as you hold the recoil starter handle.

7.If engine fails to start after three pulls, push the primer button two times and again pull the recoil starter handle.

8.If engine fails to start after 5 or 6 more tries, see the instruction in the “Troubleshooting Chart”.

WARNING

Keep hands, feet, hair, and loose clothing away from any moving parts. Avoid touching muffler and surrounding areas

–temperatures can exceed 150 degrees. Keep all safety devices and shields in place.

WARNING

Never leave the Trimmer unattended while the engine is run- ning.

C How to Stop the Engine

Move the throttle lever completely back to the STOP posi- tion. (See Figure 6)

D How to Engage the Trimmer Head

1.Start the engine. Refer to “How to Start the Engine”

Section.

2.Press and hold the start lever against the handle. (See Figure 9)

3.Press the trimmer head drive lever forward, until it locks into position. (See Figure 9)

E How to Disengage the Trimmer Head

Release the start lever (See Figure 9). This will release the trimmer head drive lever and disengage the trimmer head.

WARNING

Trimmer line will continue to rotate for several seconds after releasing the start lever. Use Caution.

Recoil Starter

Figure 8

Handle

Handle

 

Start Lever

Trimmer Head

 

Drive Lever

Figure 9

 

Questions? Call Toll Free at 1-800-737-2112

10

Copyright © 2009 MAT Engine Technologies, LLC

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Operator’s Manual Field TrimmerControl and Operating Symbols Safety DefinitionsSafety Alert Symbols Safety Warning SymbolsSave all instructions Important Safety InformationFuel Safety Storage Safety Save all instructions Unit Engine SpecificationsFeatures How to Assemble the Handle AssemblyEngine Oil How to Check Oil Level and Fill to Proper LevelAmbient Service Temperature Engine PreparationFuel How to Fill Engine with FuelOperation How to Start the EngineOperation Save all instructions How to Stop the EngineHow to Engage the Trimmer Head How to Disengage the Trimmer HeadTrimming Tips How to Adjust the Height of CutSlope Guide Service MaintenanceService Records How to Clean the Air Filter How to Change the OilHow to Replace the Trimmer Lines How to Check the Spark Plug How to Replace the Drive Belt Metl Corporate Office Correspondence only Technical ServiceHow to Prepare for Storage Problem Possible Causes Solutions TroubleshootingPowermate Field Trimmer Limited Warranty WarrantyManufacturer’s Warranty Coverage Emisson Control System WarrantyYour Warranty Rights and Obligations Limitations of Liability WarrantyHow to Obtain Warranty Service ExclusionsSystems Covered by this Warranty Parts Description Llame sin costo al Manual del usuarioSímbolos de control y funcionamiento Símbolos de alerta para sequradadSímbolos de advertencia para seguridad Conserve todas las instrucciones Instrucciones de seguridad importantesInstrucciones de seguridad importantes la siguiente Seguridad DE Niños Cubierta del arrancador de retroceso Cubre el me EspecificacionesCaracterísticas Conserve todas las instrucciones UnidadCómo montar el asidero MontajeAceite de motor Preparción del motorCombustible Preparción del motor la siguienteCómo arrancar el motor UsoAntes de arrancar el motor Cómo desengranar el cabezal de la segadora Uso la siguiente Conserve todas las instruccionesCómo parar el motor Cómo engranar el cabezal de la segadoraUso la siguiente Guía Para Pendientes Notas Importantes sobre el programa de mantenimiento MantenimientoCómo limpiar filtro de aire Mantenimiento la siguienteCómo cambiar el aceite Cómo cambiar los hilos de la segadora Modelo de bujía Torch F6RTC Cómo revisar la bujíaCómo cambiar la banda del impulsor Wildlife Way Long Grove, IL Servicio técnicoCómo preparala para almacenamiento Conserve todas las instrucciones Problema Diagnóstico y resolución de problemasGarantía limitada de la Segadora Souhland Para Campo Abierto GarantíaCobertura de la garantía del fabricante Garantía la siguiente Conserve todas las instruccionesGarantía del sistema pro control de emisiones contaminantes Derechos y obligaciones al amparo de la garantíaLimitación de responsabilidad Cobertura de la garantíaCómo obtener servicio de garantía ExclusionesGarantía la siguiente California Air Resource Board Powermate Field TrimmerPara Cambiar EL Filtro DE Aire

P-WFT-16022 specifications

The Powermate P-WFT-16022 is a versatile and robust workbench tool designed to elevate the efficiency and convenience of various tasks around the workshop or home. This powerful workbench offers an array of features that cater to both professionals and DIY enthusiasts, making it an essential addition to any workspace.

One of the standout features of the Powermate P-WFT-16022 is its durable construction. Made from high-quality materials, the workbench is designed to withstand heavy use and resist wear and tear over time. The surface is engineered to be scratch-resistant, ensuring that it maintains its appearance and functionality even after extensive handling.

In terms of dimensions, the Powermate P-WFT-16022 provides a generous workspace, allowing users to work on multiple projects simultaneously. Its ample surface area is designed to accommodate a variety of tools and materials, making it ideal for woodworking, metalworking, and other crafting activities. The sturdy legs offer stability and support, ensuring that the workbench remains firmly in place during operation.

One of the technological highlights of the Powermate P-WFT-16022 is its integrated power strip. This feature comes equipped with multiple outlets, allowing users to plug in various tools and appliances without the need for additional extension cords. This not only enhances convenience but also ensures that everything needed for a project is within easy reach.

The P-WFT-16022 also incorporates adjustable height settings, making it customizable to suit the user's preferences or specific tasks. This ergonomic feature can help reduce strain and fatigue during prolonged use, contributing to a more comfortable working environment.

Another noteworthy characteristic of this workbench tool is its portability. The built-in wheels allow users to move the workbench effortlessly from one location to another. This ease of mobility makes it suitable for both workshop settings and on-site jobs, providing flexibility for various tasks.

Overall, the Powermate P-WFT-16022 is an exemplary workbench tool that combines sturdiness, functionality, and advanced features. Its practical design caters to a wide range of applications, ensuring users can tackle projects with confidence and efficiency. Whether for professional use or personal projects, this workbench is a reliable companion that meets the demands of any crafting or repair task.
Top Page Image Contents