Korg Upgrading Your System: MIDI, LOC, and CD Instructions for Complete Recovery

Upgrading the system

1. Downloading the operating system

The most recent operating system can be downloaded from the Korg website (http://www.korg.com). For details on the procedure, refer to the Korg website.

Upgrading via CD-ROM/R/RW

Insert the media containing the system file into the CD-R/ RW drive.

Upgrading via USB

Use a USB cable to connect the D3200 to your computer, and copy the system files to the D3200 folder of the PC drive.

2. Upgrading the system

(1)Access the SYSTEM/MIDI, “DiskUtility” tab page.

(2)Specify the loading source for the system file.

Click the Load System button to display the LoadSystem dialog box. Click either the “CD” or “PC” radio button to specify the loading source.

(3)Click the Yes button (or press the panel YES key) to begin the update.

If an unexpected accident such as power failure occurs while updating the system, the D3200 may become incapable of nor- mal operation. In such cases, please contact Korg distributor.

(4)When the upgrade is finished, the D3200 will automat- ically restart using the new system.

If the upgrade fails, the D3200 will display an message

and will not restart. Note the contents of the message (→p.168 “Various messages”).

Using a recovery CD to

recover the system

If for some reason the system is no longer able to start up nor- mally, you can recover the system using the CD you created in “6. Creating a system recovery CD” (→p.91).

Preserving non-system data when you recover

If you recover the system using the following procedure, data other than the system data will be preserved.

(1)While holding down the panel PAN key and LOC 2 key, press the power-on key.

A message of “System Recovery. Insert System Disk. Wait CD Mount.” will appear in the screen.

(2)Insert the recovery CD you created into the CD-R/RW drive.

Once you’ve inserted the recovery CD, do not eject it until the system recovery procedure is completed.

(3)The display will indicate “CD Read OK.” and the recovery procedure will begin automatically.

(4)When the recovery is complete, the display will indi- cate “Completed.”

(5)Click the OK button (or press the panel YES key). The opening screen will appear, and the D3200 will auto- matically restart.

When the D3200 has finished starting up, remove the recovery CD from the CD-R/RW drive.

If an error appears and the recovery is unsuccessful

The procedure described above will recover by overwriting the system data area of the hard disk. If you are unable to re- cover successfully by using this method, you’ll have to ini- tialize the entire hard disk. Be aware that when you execute the recovery procedure described below, all data on the hard disk will be erased.

(1)Press the power-off key to return to standby mode.

(2)While holding down the panel PAN key and LOC 3 key, press the power-on key.

A message of “System Recovery. Insert System Disk. Wait CD Mount.” will appear in the screen.

(3)The display will indicate “CD Read OK.” Then the display will indicate “Testing Hard Disk...” and the hard disk will be formatted.

(4)When the recovery is complete, the display will indi- cate “Completed.”

(5)Click the OK button (or press the panel YES key). The opening screen will appear, and the D3200 will auto- matically restart.

When the D3200 has finished starting up, remove the recovery CD from the CD-R/RW drive.

If this procedure is also unsuccessful, please contact your Korg distributor.

96